|
|
 |
OSRAM A36430F012G Product Specifications |
 |
|
|
|
|
|
 Safety Notices & Warnings |
| Safety Notices & Warnings: |
| • |
WARNING This lamp emits ultraviolet (UV) radiation and operates at high internal pressure. Before use read the complete warning accompanying the product. Safety advice
Due to their high luminance, UV radiation, and high internal pressure in the hot state, HBO and HXP lamps may only be operated in enclosed lamp casings designed for their operation. Since mercury is released if the lamp breaks, special safety precautions must be taken. More information is available upon request, or can be found in the leaflet or operating instructions included with the lamp. |
 Disposal and Recycling Information |
| • |
Disposal When disposing of spent lamps, always consult federal, state, local and provincial hazardous waste disposal rules and regulations to ensure proper disposal. |
|
|
 Manufacturer Documents |
|
•Osram Product Brochure |
|
 Product Notes |
|
OSRAM HBO R and HXP Mercury Short Arc Discharge Lamps (≤ 200W) are intense point sources that provide a broad spectrum through the visible and ultraviolet range. These lamps are optimal sources for fiber illumination devices for Medical, Scientific, and various Industrial areas. The broad spectrum makes these lamps ideal for microscopy applications. Product features and benefits - High luminance / radiance with intense point source
- Broad spectral distribution in the visible and ultraviolet range
- Enhanced UV characteristics available on some types
- High arc stability
Areas of application - Microscopy
- Laboratory & Analysis
- UV Curing
- Fiber Illumination
- Microscopy
- Solar Simulation
Effective and optimized illumination for analyzing and diagnostics to identify the molecular structure of a compound or to determine its purity. The filament with tight tolerances provides an excellent and uniform illumination of small areas with constant and brilliant light over the entire lifetime. Customized solutions on request. Illumination for microscopy visualization in medical and life science systems. Providing white light and a wide range of wavelengths for fluorescence applications. Optimized for surgical, diagnostic, and inspection microscopy. - p (Operating Position) = Horizontal
- 125 mm (front ring to plug) and 95 mm (rear cap to plug) silicon cables terminated with MATE-N-LOK plug no. 350809-1 with pins no. 926868-3 by AMP Inc.
- It takes time for the mercury in the lamp to evaporate. Typically 95% of luminous output are generated after approximately 120 seconds. For quality inspection purposes allow for five minutes burning time.
- Excessive airflow may lead to mercury condensation in the discharge lamp bulb and consequently to a performance drop.
- Operation time after which either aperture lumens decrease to 50% of initial value or the lamp voltage reaches 115 V and the lamp cannot be ignited. Switching cycle: 210 minutes on / 30 minutes off.
- Operational bulb wall temperatures lower than 850°C may lead to mercury condensation and prevent the lamp from reaching stable operation conditions; temperatures higher than 950°C may lead to premature failures of the lamp.
- Output is understood as total energy in the range 320 to 500 nm focusereflector.
|
|
|
|
|
|
|
|
|
Text-to-Speech Descriptions  |
|
|
|
|
|
|
|
|
|
|
|
