|
Hikari MED-M01103 FHE/ESB
| MFG Code MED-M01103 | Part Number BC8532 |
| 20 watts | 6 volts |
| G4 (Miniature 2-Pin) Base Type | FHE/ESB ANSI Code |
| Clear Finish | 450 Lumens |
| 100 hrs. | 0.354" Bulb Diameter |
| 0.8" Light Center Len | 1.2" Max Overall Len |
Manufacturer:  |
|
 Be Authentic.BulbConnection is an Authorized Distributor for Hikari products. As an Authorized Distributor, this item is guaranteed to be an authentic, brand new, genuine Hikari part supplied directly from Hikari. |
DISCOUNT PRICING
*Discontinued Item - 23 left in stock. |
|
|
|
|
|
|
|
|
|
|
 |
 |
|
|||||
|
|
|
|||
|
|||||
|
Product Description |
|
|
Cross to Philips 7388, Guerra 6518/2, Osram HLX64250, Ushio 1000532. |
|
|
Description:
The Hikari FHE/ESB replacement lamp has a Hikari product code of MED-M01103.
This Hikari FHE/ESB lamp is a 20 watt bulb. The Hikari FHE/ESB bulb is a 6 volt bulb.
The Hikari FHE/ESB replacement bulb has a part number of BC8532.
This Hikari bulb has an ANSI code of FHE/ESB. The Hikari FHE/ESB replacement bulb has a base type of G4 (Miniature 2-Pin). The maximum overall length of the Hikari FHE/ESB replacement lamp is 1.200 inches or 30.5 millimeters. The bulb diameter of the Hikari FHE/ESB replacement lamp is 0.354 inches or 9.0 millimeters. The light center length of this Hikari FHE/ESB bulb is 0.800 inches or 20.3 millimeters. The Hikari FHE/ESB replacement bulb is often referred to by the product code MED-M01103.
The Hikari FHE/ESB replacement lamp has a reorder code of BC8532.
The manufacturer continuous use average life rating for this Hikari FHE/ESB lamp is 100 hours. The rated lumens value of the Hikari FHE/ESB replacement lamp is 450. The filament type of this Hikari FHE/ESB bulb is C-6. The Hikari FHE/ESB replacement bulb has a Clear finish.
|
|
|
Specifications |
|
| General Specifications | |||
|
Watts |
20WATTS A unit of electrical power. Lamps are rated in watts to indicate the rate at which they consume energy. This Hikari MED-M01103 FHE/ESB Bulb is rated at 20 watts. |
|
|
Volts |
6VOLTS A measure of "electrical pressure" between two points. The higher the voltage, the more current will be pushed through a resistor connected across the points. The volt specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 277 V) refers to the line voltage it must be connected to. This Hikari MED-M01103 FHE/ESB Bulb is rated at 6 volts. |
|
|
Base Type |
G4 (Miniature 2-Pin)BASE TYPE The base is the end of the lamp that fits into the receptacle connected to the electrical supply. There are many types of bases used in lamps, screw bases being the most common for incandescent and HID lamps, while bipin bases are common for linear fluorescent lamps. This Hikari MED-M01103 FHE/ESB Bulb has a base type of G4 (Miniature 2-Pin). |
|
|
Rated Average Life |
100 hrsRATED AVERAGE LIFE This is the manufacturer provided rating for the average expected life of a lamp. For most lamp types, rated lamp life is the length of time of a statistically large sample between first use and the point when 50% of the lamps have failed. Note, this is not a manufacturer guarantee of life, but an estimate based on typical average testing. It is possible to define a "useful life" of a lamp based on practical considerations involving lumen depreciation and color shift. This Hikari MED-M01103 FHE/ESB Bulb has an rated average life of 100 hours. |
|
|
Lumens |
450LUMENS A measure of the luminous flux or quantity of light emitted by a source. For example, a dinner candle provides about 12 lumens. A 60-watt Soft White incandescent lamp provides about 840 lumens. This Hikari MED-M01103 FHE/ESB Bulb emits 450 lumens. |
|
|
Filament |
C-6FILAMENT Filaments are designated by a letter combination in which C is a coiled wire filament, and CC is a coiled wire that is itself wound into a larger coil. Numbers represent the type of filament-support arrangement. This Hikari MED-M01103 FHE/ESB Bulb has a C-6 filament. |
|
|
Bulb Finish |
ClearBULB FINISH The bulb coating of the bulb. Typical values include clear, frost, and colored. This Hikari MED-M01103 FHE/ESB Bulb has a Clear bulb finish. |
|
| Dimensions | |||
|
Maximum Overall Length (MOL) |
1.200 in (30.5 mm) |
|
|
Bulb Diameter |
0.354 in (9.0 mm) |
|
|
Light Center Length (LCL) |
0.800 in (20.3 mm) |
|
| Product Specifications | |||
|
Manufacturer Product Code |
MED-M01103 (MEDM01103) |
|
|
Part Number |
BC8532 |
|
|
ANSI Code |
FHE/ESB |
|
|
Ordering Code(s) |
FHE/ESB |
|
|
Standard Case Size (listed prices are per lamp) |
10 |
|
|
UPC |
844409007297 |
|
|
Text-to-Speech  |
|
|
||
Customers Also Bought
