| MFG Code 73676 | Part Number BC8432 |
| 13 watts | 120 volts |
| E26 (Medium Screw) Base Type | 82 CRI |
| 900 Lumens | 50000 hrs. |
| 120° Beam Spread | 3000 K |
| 7.343" Bulb Diameter | 2.8" Max Overall Len |
Manufacturer: |
|
|
BulbConnection is an Authorized Distributor for Sylvania-Osram products. As an Authorized Distributor, this item is guaranteed to be an authentic, brand new, genuine Sylvania-Osram part supplied directly from Sylvania-Osram. |
|
|
|
|
|
|
|
![]() |
![]() |
|
||||||
|
||||||
Product Description |
||
The SYLVANIA ULTRA Light Disk is an LED downlight kit creating high performing white light and is optimized for new construction and retrofit applications. Multiple installation options for both recessed and surface mount applications. Installation is done quickly and easily in most standard four-inch, five-inch and six-inch Insulated Ceiling (IC) housings,Airtight (AT) housings and non-IC housings. It can also be surface mounted to standard 4-inch J-Box or using specially designed Connector Box. The SYLVANIA ULTRA Light Disk is dimmable to 20% with standard 120Velectronic low voltage dimmers (recommended), incandescent or magnetic low voltage dimmers. In some cases, standard incandescent dimmers require a minimum load of typically >40 watts on the circuit for full range dimming performance (four LED modules). For dimming with digital(smart) multi-location dimmers or when dimming fewer than four LED modules, electronic low-voltage (ELV) dimmers are required (some ELV dimmers need a neutral connection in the wall box). Features & Benefits: Fits into most 4", 5" and 6" recessed downlight fixtures, Surface mount to standard 4" J-Box or using Connector Box, Dimmable down to 20%, Suitable for dry, damp and wet locations, No warm-up time, instant-on with full light output and stable lamp to lamp color. |
||
Specifications |
||
| General Specifications | |||
Watts |
13WATTS A unit of electrical power. Lamps are rated in watts to indicate the rate at which they consume energy. This Sylvania-Osram 73676 Bulb is rated at 13 watts. |
||
Volts |
120VOLTS A measure of "electrical pressure" between two points. The higher the voltage, the more current will be pushed through a resistor connected across the points. The volt specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 277 V) refers to the line voltage it must be connected to. This Sylvania-Osram 73676 Bulb is rated at 120 volts. |
||
Base Type |
E26 (Medium Screw)BASE TYPE The base is the end of the lamp that fits into the receptacle connected to the electrical supply. There are many types of bases used in lamps, screw bases being the most common for incandescent and HID lamps, while bipin bases are common for linear fluorescent lamps. This Sylvania-Osram 73676 Bulb has a base type of E26 (Medium Screw). |
||
Rated Average Life |
50000 hrsRATED AVERAGE LIFE This is the manufacturer provided rating for the average expected life of a lamp. For most lamp types, rated lamp life is the length of time of a statistically large sample between first use and the point when 50% of the lamps have failed. Note, this is not a manufacturer guarantee of life, but an estimate based on typical average testing. It is possible to define a "useful life" of a lamp based on practical considerations involving lumen depreciation and color shift. This Sylvania-Osram 73676 Bulb has an rated average life of 50000 hours. |
||
Color Temperature |
3000 KCOLOR TEMPERATURE A measure indicating the degree of "yellowness" or "blueness" of a white light source. Measured in kelvins, Color Temperature represents the temperature an incandescent object (like a filament) must reach to mimic the color of the light emitting from the lamp. Yellowish-white ("warm") sources, like incandescent lamps, have lower color temperatures in the 2700K-3000K range; white and bluish-white ("cool") sources, such as cool white (4100K) and natural daylight (6000K), have higher color temperatures. The higher the color temperature the whiter, or bluer, the light will be. The lower the color temperature the more yellow the light will be. This Sylvania-Osram 73676 Bulb has a color temperature of 3000 K. |
||
Beam Spread |
120°BEAM SPREAD The angular dimension of the cone of light from reflectorized lamps encompassing the central part of the beam out to the angle where the intensity is 50% of maximum. The beam angle sometimes called "beam spread" is often part of the ordering code for the reflectorized lamps. This Sylvania-Osram 73676 Bulb has a beam spread of 120°. |
||
Lumens |
900LUMENS A measure of the luminous flux or quantity of light emitted by a source. For example, a dinner candle provides about 12 lumens. A 60-watt Soft White incandescent lamp provides about 840 lumens. This Sylvania-Osram 73676 Bulb emits 900 lumens. |
||
Color Rendering Index (CRI) |
82COLOR RENDERING INDEX (CRI) An international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more true colors generally appear. CRI ratings of various lamps may be compared, but a numerical comparison is only valid if the lamps are close in color temperature. CRI differences among lamps are not usually significant (visible to the eye) unless the difference is more than 3-5 points. This Sylvania-Osram 73676 Bulb is rated at 82 CRI color rendering index. |
||
| Dimensions | |||
Maximum Overall Length (MOL) |
2.800 in (71.1 mm) |
||
Bulb Diameter |
7.343 in (186.5 mm) |
||
| Product Specifications | |||
Manufacturer Product Code |
73676 |
||
Part Number |
BC8432 |
||
Ordering Code(s) |
LED/LD/900/830/FL120 |
||
Standard Case Size (listed prices are per lamp) |
2 |
||
RoHS Certified |
Yes |
||
TCLP Compliant |
Yes |
||
UPC |
046135736766 |
||
Usage Notes |
||
Operating temperature range between -4 deg F and +104 deg F (-20 deg C and +40 deg C). Suitable for dry, damp and wet location environments. Suitable for dimmers or in housings controlled by a dimmer see www.sylvania.com/LightDisk for detailed dimmer compatibility list. Not intended for use with emergency light fixtures or exit lights. For use in housings that can structurally support a lamp weighing one pound. Designed to install in standard 4", 5" & 6" insulated and non-insulated housings or with standard 4" J-Box (not included) or using Connector Box(sold separately). For a list of compatible housings, please refer to www.sylvania.com/LightDisk. |
||
Manufacturer Documents |
||
| • |
||