|
Hikari MED-M01082 JC 24V 100W G6.35
| MFG Code MED-M01082 | Part Number BC6879 |
| 100 watts | 24 volts |
| G6.35 (Glass 2-Pin) Base Type | Clear Finish |
| 2700 Lumens | 300 hrs. |
| 0.532" Bulb Diameter | 1.2" Light Center Len |
| 1.8" Max Overall Len |
Manufacturer:  |
|
 Be Authentic.BulbConnection is an Authorized Distributor for Hikari products. As an Authorized Distributor, this item is guaranteed to be an authentic, brand new, genuine Hikari part supplied directly from Hikari. |
*Discontinued Item - 0 left in stock.
|
|
|
|
|
|
|
 |
 |
|
|||||
 |
|
|
|||
|
|||||
|
Product Description |
|
|
Cross to Osram 64638, Berchtold CZ905-24, BBT AMP024. JE-066E. |
|
|
Description:
The Hikari JC 24V 100W G6.35 replacement lamp has a Hikari product code of MED-M01082.
This Hikari JC 24V 100W G6.35 bulb is a 100 watt bulb. The Hikari JC 24V 100W G6.35 lamp is a 24 volt bulb.
The Hikari JC 24V 100W G6.35 replacement bulb has a part number of BC6879.
The Hikari JC 24V 100W G6.35 replacement lamp has a base type of G6.35 (Glass 2-Pin). The maximum overall length of the Hikari JC 24V 100W G6.35 replacement bulb is 1.800 inches or 45.7 millimeters. The bulb diameter of the Hikari JC 24V 100W G6.35 replacement bulb is 0.532 inches or 13.5 millimeters. The light center length of this Hikari JC 24V 100W G6.35 bulb is 1.200 inches or 30.5 millimeters. The Hikari JC 24V 100W G6.35 replacement lamp is often referred to by the product code MED-M01082.
The Hikari JC 24V 100W G6.35 replacement lamp has a reorder code of BC6879.
The manufacturer continuous use average life rating for this Hikari JC 24V 100W G6.35 bulb is 300 hours. The rated lumens value of the Hikari JC 24V 100W G6.35 replacement bulb is 2700. The filament type of this Hikari JC 24V 100W G6.35 bulb is C-Bar6. The Hikari JC 24V 100W G6.35 replacement lamp has a Clear finish.
|
|
|
Specifications |
|
| General Specifications | |||
|
Watts |
100WATTS A unit of electrical power. Lamps are rated in watts to indicate the rate at which they consume energy. This Hikari MED-M01082 Bulb is rated at 100 watts. |
|
|
Volts |
24VOLTS A measure of "electrical pressure" between two points. The higher the voltage, the more current will be pushed through a resistor connected across the points. The volt specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 277 V) refers to the line voltage it must be connected to. This Hikari MED-M01082 Bulb is rated at 24 volts. |
|
|
Base Type |
G6.35 (Glass 2-Pin)BASE TYPE The base is the end of the lamp that fits into the receptacle connected to the electrical supply. There are many types of bases used in lamps, screw bases being the most common for incandescent and HID lamps, while bipin bases are common for linear fluorescent lamps. This Hikari MED-M01082 Bulb has a base type of G6.35 (Glass 2-Pin). |
|
|
Rated Average Life |
300 hrsRATED AVERAGE LIFE This is the manufacturer provided rating for the average expected life of a lamp. For most lamp types, rated lamp life is the length of time of a statistically large sample between first use and the point when 50% of the lamps have failed. Note, this is not a manufacturer guarantee of life, but an estimate based on typical average testing. It is possible to define a "useful life" of a lamp based on practical considerations involving lumen depreciation and color shift. This Hikari MED-M01082 Bulb has an rated average life of 300 hours. |
|
|
Lumens |
2700LUMENS A measure of the luminous flux or quantity of light emitted by a source. For example, a dinner candle provides about 12 lumens. A 60-watt Soft White incandescent lamp provides about 840 lumens. This Hikari MED-M01082 Bulb emits 2700 lumens. |
|
|
Filament |
C-Bar6FILAMENT Filaments are designated by a letter combination in which C is a coiled wire filament, and CC is a coiled wire that is itself wound into a larger coil. Numbers represent the type of filament-support arrangement. This Hikari MED-M01082 Bulb has a C-Bar6 filament. |
|
|
Bulb Finish |
ClearBULB FINISH The bulb coating of the bulb. Typical values include clear, frost, and colored. This Hikari MED-M01082 Bulb has a Clear bulb finish. |
|
| Dimensions | |||
|
Maximum Overall Length (MOL) |
1.800 in (45.7 mm) |
|
|
Bulb Diameter |
0.532 in (13.5 mm) |
|
|
Light Center Length (LCL) |
1.200 in (30.5 mm) |
|
| Product Specifications | |||
|
Manufacturer Product Code |
MED-M01082 (MEDM01082) |
|
|
Part Number |
BC6879 |
|
|
Ordering Code(s) |
JC 24V 100W G6.35 |
|
|
Standard Case Size (listed prices are per lamp) |
10 |
|
|
UPC |
844409004586 |
|
|
Text-to-Speech  |
|
|
||
