| MFG Code MED-M01003 | Part Number BC4725 |
| 25 watts | 6 volts |
| PY16-1.25 (PreCentered) Base Type | Clear Finish |
| 510 Lumens | 100 hrs. |
| 0.354" Bulb Diameter | 1.25" Light Center Len |
| 1.181" Max Overall Len |
Manufacturer: |
|
|
BulbConnection is an Authorized Distributor for Hikari products. As an Authorized Distributor, this item is guaranteed to be an authentic, brand new, genuine Hikari part supplied directly from Hikari. |
|
|
|
|
|
|
|
|
![]() |
![]() |
|
||||||
|
||||||
Product Description |
||
Description:
The Hikari JC 6V 25W PY16-1.25 replacement bulb has a Hikari product code of MED-M01003.
This Hikari JC 6V 25W PY16-1.25 bulb is a 25 watt bulb. The Hikari NARVA 25 bulb is a 6 volt bulb.
The Hikari JC 6V 25W PY16-1.25 replacement bulb has a part number of BC4725.
The Hikari NARVA 25 replacement bulb has a base type of PY16-1.25 (PreCentered). The maximum overall length of the Hikari NARVA 25 replacement lamp is 1.181 inches or 30.0 millimeters. The bulb diameter of the Hikari NARVA 25 replacement bulb is 0.354 inches or 9.0 millimeters. The light center length of this Hikari JC 6V 25W PY16-1.25 lamp is 1.250 inches or 31.8 millimeters. The Hikari NARVA 25 replacement lamp is often referred to by the product code MED-M01003.
The Hikari NARVA 25 replacement lamp has a reorder code of BC4725.
Other order codes that the Hikari JC 6V 25W PY16-1.25 replacement bulb may be referred to as are JC 6V 25W PY16-1.25, JC6V25WPY16-1.25, JC 6V 25W PY161.25, JC/6V/25W/PY16-1.25, JC-6V-25W-PY16-1.25, JC 6V 25W PY16 1.25, JC 6V 25W PY16/1.25, NARVA 25, NARVA25, NARVA/25, NARVA-25. The manufacturer continuous use average life rating for this Hikari NARVA 25 lamp is 100 hours. The rated lumens value of the Hikari JC 6V 25W PY16-1.25 replacement bulb is 510. The filament type of this Hikari JC 6V 25W PY16-1.25 lamp is C-Bar6. The Hikari JC 6V 25W PY16-1.25 replacement lamp has a Clear finish.
|
||
Specifications |
||
| General Specifications | |||
Watts |
25WATTS A unit of electrical power. Lamps are rated in watts to indicate the rate at which they consume energy. This Hikari MED-M01003 Bulb is rated at 25 watts. |
||
Volts |
6VOLTS A measure of "electrical pressure" between two points. The higher the voltage, the more current will be pushed through a resistor connected across the points. The volt specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 277 V) refers to the line voltage it must be connected to. This Hikari MED-M01003 Bulb is rated at 6 volts. |
||
Base Type |
PY16-1.25 (PreCentered)BASE TYPE The base is the end of the lamp that fits into the receptacle connected to the electrical supply. There are many types of bases used in lamps, screw bases being the most common for incandescent and HID lamps, while bipin bases are common for linear fluorescent lamps. This Hikari MED-M01003 Bulb has a base type of PY16-1.25 (PreCentered). |
||
Rated Average Life |
100 hrsRATED AVERAGE LIFE This is the manufacturer provided rating for the average expected life of a lamp. For most lamp types, rated lamp life is the length of time of a statistically large sample between first use and the point when 50% of the lamps have failed. Note, this is not a manufacturer guarantee of life, but an estimate based on typical average testing. It is possible to define a "useful life" of a lamp based on practical considerations involving lumen depreciation and color shift. This Hikari MED-M01003 Bulb has an rated average life of 100 hours. |
||
Lumens |
510LUMENS A measure of the luminous flux or quantity of light emitted by a source. For example, a dinner candle provides about 12 lumens. A 60-watt Soft White incandescent lamp provides about 840 lumens. This Hikari MED-M01003 Bulb emits 510 lumens. |
||
Filament |
C-Bar6FILAMENT Filaments are designated by a letter combination in which C is a coiled wire filament, and CC is a coiled wire that is itself wound into a larger coil. Numbers represent the type of filament-support arrangement. This Hikari MED-M01003 Bulb has a C-Bar6 filament. |
||
Bulb Finish |
ClearBULB FINISH The bulb coating of the bulb. Typical values include clear, frost, and colored. This Hikari MED-M01003 Bulb has a Clear bulb finish. |
||
| Dimensions | |||
Maximum Overall Length (MOL) |
1.181 in (30.0 mm) |
||
Bulb Diameter |
0.354 in (9.0 mm) |
||
Light Center Length (LCL) |
1.250 in (31.8 mm) |
||
| Product Specifications | |||
Manufacturer Product Code |
MED-M01003 (MEDM01003) |
||
Part Number |
BC4725 |
||
Ordering Code(s) |
JC 6V 25W PY16-1.25 NARVA 25 |
||
Standard Case Size (listed prices are per lamp) |
10 |
||
UPC |
844409004166 |
||