|
GE 44840 782
| MFG Code 44840 | Part Number BC3138 |
| 20 watts | 12 volts |
| G4 (Miniature 2-Pin) Base Type | T-2.75 Bulb Type |
| 782 ANSI Code | Clear Finish |
| 314 Lumens | 25 Candle Power |
| 2000 hrs. | 0.3440" Bulb Diameter |
| 0.7700" Light Center Len | 1.05" Max Overall Len |
Manufacturer:  |
|
 Be Direct.This product is a verified authentic, brand new, genuine GE part supplied directly from GE by an Authorized Distributor. |
*Discontinued Item - 0 left in stock.
|
|
|
|
|
|
|
 |
 |
|
|||||
 |
|
|
|||
|
|||||
|
Product Description |
|
|
Primary Application: Emergency Building. Halogen. 1.66 Amp. |
|
|
Description:
The GE 782 replacement lamp has a GE product code of 44840.
This GE 782 lamp is a 20 watt bulb. The GE 782 lamp is a 12 volt bulb.
The GE 782 replacement lamp has a part number of BC3138.
This GE bulb has an ANSI code of 782. The bulb type of this GE 782 lamp is type T-2.75. The base type of the GE 782 replacement bulb may also be called T2.75. The GE 782 replacement lamp has a base type of G4 (Miniature 2-Pin). The maximum overall length of the GE 782 replacement bulb is 1.050 inches or 26.7 millimeters. The bulb diameter of the GE 782 replacement lamp is 0.344 inches or 8.7 millimeters. The light center length of this GE 782 bulb is 0.770 inches or 19.6 millimeters. The GE 782 replacement bulb is often referred to by the product code 44840.
The GE 782 replacement bulb has a reorder code of BC3138.
The manufacturer continuous use average life rating for this GE 782 lamp is 2000 hours. The rated lumens value of the GE 782 replacement lamp is 314. This bulb has a candle power rating of 25. The filament type of this GE 782 bulb is C-6. The GE 782 replacement bulb has a Clear finish.
|
|
|
Specifications |
|
| General Specifications | |||
|
Watts |
20WATTS A unit of electrical power. Lamps are rated in watts to indicate the rate at which they consume energy. This GE 44840 782 Bulb is rated at 20 watts. |
|
|
Volts |
12VOLTS A measure of "electrical pressure" between two points. The higher the voltage, the more current will be pushed through a resistor connected across the points. The volt specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 277 V) refers to the line voltage it must be connected to. This GE 44840 782 Bulb is rated at 12 volts. |
|
|
Base Type |
G4 (Miniature 2-Pin)BASE TYPE The base is the end of the lamp that fits into the receptacle connected to the electrical supply. There are many types of bases used in lamps, screw bases being the most common for incandescent and HID lamps, while bipin bases are common for linear fluorescent lamps. This GE 44840 782 Bulb has a base type of G4 (Miniature 2-Pin). |
|
|
Bulb Type |
T-2.75BULB TYPE The bulb type refers to the shape and class of the bulb. This GE 44840 782 Bulb has a base type of T-2.75. |
|
|
Rated Average Life |
2000 hrsRATED AVERAGE LIFE This is the manufacturer provided rating for the average expected life of a lamp. For most lamp types, rated lamp life is the length of time of a statistically large sample between first use and the point when 50% of the lamps have failed. Note, this is not a manufacturer guarantee of life, but an estimate based on typical average testing. It is possible to define a "useful life" of a lamp based on practical considerations involving lumen depreciation and color shift. This GE 44840 782 Bulb has an rated average life of 2000 hours. |
|
|
Lumens |
314LUMENS A measure of the luminous flux or quantity of light emitted by a source. For example, a dinner candle provides about 12 lumens. A 60-watt Soft White incandescent lamp provides about 840 lumens. This GE 44840 782 Bulb emits 314 lumens. |
|
|
Candle Power |
25CANDLE POWER (CANDELA) The measure of luminous intensity of a source in a given direction. The term has been retained from the early days of lighting when a standard candle of a fixed size and composition was defined as producing one candela in every direction. A plot of intensity versus direction is called a candela distribution curve and is often provided for reflectorized lamps and for luminaires with a lamp operating in them. This GE 44840 782 Bulb emits 25 candela of candle power. |
|
|
Filament |
C-6FILAMENT Filaments are designated by a letter combination in which C is a coiled wire filament, and CC is a coiled wire that is itself wound into a larger coil. Numbers represent the type of filament-support arrangement. This GE 44840 782 Bulb has a C-6 filament. |
|
|
Bulb Finish |
ClearBULB FINISH The bulb coating of the bulb. Typical values include clear, frost, and colored. This GE 44840 782 Bulb has a Clear bulb finish. |
|
| Dimensions | |||
|
Maximum Overall Length (MOL) |
1.050 in (26.7 mm) |
|
|
Bulb Diameter |
0.344 in (8.7 mm) |
|
|
Light Center Length (LCL) |
0.770 in (19.6 mm) |
|
| Product Specifications | |||
|
Manufacturer Product Code |
44840 |
|
|
Part Number |
BC3138 |
|
|
ANSI Code |
782 |
|
|
Ordering Code(s) |
782 |
|
|
Standard Case Size (listed prices are per lamp) |
10 |
|
|
UPC |
043168448406 |
|
|
Usage Notes |
|
|
.028" metal pins spaced 44mm (.157") apart, GE's two-pin lamps might not be compatible with all G-4 sockets since many sockets do not provide clearance for the exhaust tip. |
|
|
Safety Notices & Warnings |
|
|
Risk of Burn: Allow lamp/fixture to cool before handling. |
|
|
Pressurized lamp--unexpected rupture may cause injury, fire, or property damage: Avoid direct water/liquid contact. Dispose of lamp in a closed container. Do not exceed rated voltage. Do not turn on lamp until fully installed. Do not use lamp if outer glass is scratched or broken. Keep children away. Use eye protection when handling lamp. Use in enclosed fixture rated for this product. Use protective screen when handling. |
|
|
Text-to-Speech  |
|
|
||
