|
   |
GE 41729 EPT
| MFG Code 41729 | Part Number BC2421 |
| 42 watts | 10.8 volts |
| GX5.3 (2-Pin, Round Pins) Base Type | MR-16 Bulb Type |
| EPT ANSI Code | Clear Finish |
| 10000 hrs. | 2900 K |
| 2" Bulb Diameter | 1.75" Max Overall Len |
Manufacturer:  |
|
 Be Direct.This product is a verified authentic, brand new, genuine GE part supplied directly from GE by an Authorized Distributor. |
Brand Comparison |
*Discontinued Item - 0 left in stock.
|
|
|
|
|
|
|
 |
 |
|
||||||
|
|
|
||||
|
||||||
|
Product Description |
|
|
Faceted Dichroic Reflector, Fiber Optics, Faceted Dichroic Reflector, Fiber Optics |
|
|
Description:
The GE EPT replacement lamp has a GE product code of 41729.
This GE EPT lamp is a 42 watt bulb. The GE EPT lamp is a 10.8 volt bulb.
The GE EPT replacement lamp has a part number of BC2421.
This GE lamp has an ANSI code of EPT. The bulb type of this GE EPT lamp is type MR-16. The base type of the GE EPT replacement bulb may also be called MR16. The GE EPT replacement bulb has a base type of GX5.3 (2-Pin, Round Pins). The maximum overall length of the GE EPT replacement lamp is 1.750 inches or 44.5 millimeters. The bulb diameter of the GE EPT replacement bulb is 2.000 inches or 50.8 millimeters. The GE EPT replacement bulb is often referred to by the product code 41729.
The GE EPT replacement bulb has a reorder code of BC2421.
The manufacturer continuous use average life rating for this GE EPT bulb is 10000 hours. The color temperature of this replacement bulb is 2900 degrees Kelvin. The filament type of this GE EPT bulb is C-6. The GE EPT replacement bulb has a Clear finish. The operating position of this replacement bulb is Horiz15/BD.
|
|
|
Specifications |
|
| General Specifications | |||
|
Watts |
42WATTS A unit of electrical power. Lamps are rated in watts to indicate the rate at which they consume energy. This GE 41729 EPT Bulb is rated at 42 watts. |
|
|
Volts |
10.8VOLTS A measure of "electrical pressure" between two points. The higher the voltage, the more current will be pushed through a resistor connected across the points. The volt specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 277 V) refers to the line voltage it must be connected to. This GE 41729 EPT Bulb is rated at 10.8 volts. |
|
|
Base Type |
GX5.3 (2-Pin, Round Pins)BASE TYPE The base is the end of the lamp that fits into the receptacle connected to the electrical supply. There are many types of bases used in lamps, screw bases being the most common for incandescent and HID lamps, while bipin bases are common for linear fluorescent lamps. This GE 41729 EPT Bulb has a base type of GX5.3 (2-Pin, Round Pins). |
|
|
Bulb Type |
MR-16BULB TYPE The bulb type refers to the shape and class of the bulb. This GE 41729 EPT Bulb has a base type of MR-16. |
|
|
Rated Average Life |
10000 hrsRATED AVERAGE LIFE This is the manufacturer provided rating for the average expected life of a lamp. For most lamp types, rated lamp life is the length of time of a statistically large sample between first use and the point when 50% of the lamps have failed. Note, this is not a manufacturer guarantee of life, but an estimate based on typical average testing. It is possible to define a "useful life" of a lamp based on practical considerations involving lumen depreciation and color shift. This GE 41729 EPT Bulb has an rated average life of 10000 hours. |
|
|
Color Temperature |
2900 KCOLOR TEMPERATURE A measure indicating the degree of "yellowness" or "blueness" of a white light source. Measured in kelvins, Color Temperature represents the temperature an incandescent object (like a filament) must reach to mimic the color of the light emitting from the lamp. Yellowish-white ("warm") sources, like incandescent lamps, have lower color temperatures in the 2700K-3000K range; white and bluish-white ("cool") sources, such as cool white (4100K) and natural daylight (6000K), have higher color temperatures. The higher the color temperature the whiter, or bluer, the light will be. The lower the color temperature the more yellow the light will be. This GE 41729 EPT Bulb has a color temperature of 2900 K. |
|
|
Filament |
C-6FILAMENT Filaments are designated by a letter combination in which C is a coiled wire filament, and CC is a coiled wire that is itself wound into a larger coil. Numbers represent the type of filament-support arrangement. This GE 41729 EPT Bulb has a C-6 filament. |
|
|
Operating Position |
Horiz15/BDOPERATING POSITION Mercury and High Pressure Sodium lamps may be operated in any burn position and will still maintain their rated performance specifications. Metal Halide and Low Pressure Sodium lamps, however, are optimized for performance in specific burn positions, or may be restricted to certain burn positions for safety reasons. This GE 41729 EPT Bulb has an operating position of Horiz15/BD. |
|
|
Bulb Finish |
ClearBULB FINISH The bulb coating of the bulb. Typical values include clear, frost, and colored. This GE 41729 EPT Bulb has a Clear bulb finish. |
|
| Dimensions | |||
|
Maximum Overall Length (MOL) |
1.750 in (44.5 mm) |
|
|
Bulb Diameter |
2.000 in (50.8 mm) |
|
| Product Specifications | |||
|
Manufacturer Product Code |
41729 |
|
|
Part Number |
BC2421 |
|
|
ANSI Code |
EPT |
|
|
Ordering Code(s) |
EPT |
|
|
Standard Case Size (listed prices are per lamp) |
10 |
|
|
UPC |
043168993432 |
|
|
Safety Notices & Warnings |
|
|
Risk of Burn: Allow lamp/fixture to cool before handling. Turn power off before installing lamp. |
|
|
Lamp may shatter and cause injury if broken: Dispose of lamp in a closed container. Do not use lamp if outer glass is scratched or broken. |
|
|
Risk of Electric Shock: Turn power off before inspection, installation or removal. |
|
|
Risk of Fire: Keep combustible materials away from lamp. Use in enclosed fixture rated for this product. |
|
|
Pressurized lamp--unexpected rupture may cause injury, fire, or property damage: Avoid direct water, liquid or metal contact. Do not exceed 110% of rated voltage. Do not use lamp if outer glass is scratched or broken. Use in enclosed fixture rated for this product. |
|
|
Text-to-Speech  |
|
|
||
