|
Ushio 1000580 FNC/FG
| MFG Code 1000580 | Part Number BC2367 |
| 50 watts | 12 volts |
| GU5.3 (2-Pin, Round Pins) Base Type | MR-16 Bulb Type |
| FNC/FG ANSI Code | Yellow Lens Finish |
| 9000 Candle Power | 4000 hrs. |
| 12° Beam Spread | 2" Bulb Diameter |
| 1.78" Max Overall Len |
Manufacturer:  |
|
 Be Authentic.BulbConnection is an Authorized Distributor for Ushio products. As an Authorized Distributor, this item is guaranteed to be an authentic, brand new, genuine Ushio part supplied directly from Ushio. |
*Discontinued Item - 0 left in stock.
|
|
|
|
|
|
|
 |
 |
|
|||||
 |
|
|
|||
|
|||||
|
Product Description |
|
|
PopStar Colored Dichoric Front Glass, Dimmable USHIO Popstar lamps allow colors to be added to your design without the added expense of colored filters and gels. The highest quality dichroic coatings are applied to the front cover glass of these MR-16 lamps to provide deep color saturation. Computer controlled alignment of the axial filaments in the Popstar lamps allow precise beam control. All of the Popstar lamps have UV protecting quartz used for the bulb wall to protect both the dichroic filter and the illuminated subject. |
|
|
|
|
|
Specifications |
|
| General Specifications | |||
|
Watts |
50WATTS A unit of electrical power. Lamps are rated in watts to indicate the rate at which they consume energy. This Ushio 1000580 FNC/FG Bulb is rated at 50 watts. |
|
|
Volts |
12VOLTS A measure of "electrical pressure" between two points. The higher the voltage, the more current will be pushed through a resistor connected across the points. The volt specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 277 V) refers to the line voltage it must be connected to. This Ushio 1000580 FNC/FG Bulb is rated at 12 volts. |
|
|
Base Type |
GU5.3 (2-Pin, Round Pins)BASE TYPE The base is the end of the lamp that fits into the receptacle connected to the electrical supply. There are many types of bases used in lamps, screw bases being the most common for incandescent and HID lamps, while bipin bases are common for linear fluorescent lamps. This Ushio 1000580 FNC/FG Bulb has a base type of GU5.3 (2-Pin, Round Pins). |
|
|
Bulb Type |
MR-16BULB TYPE The bulb type refers to the shape and class of the bulb. This Ushio 1000580 FNC/FG Bulb has a base type of MR-16. |
|
|
Rated Average Life |
4000 hrsRATED AVERAGE LIFE This is the manufacturer provided rating for the average expected life of a lamp. For most lamp types, rated lamp life is the length of time of a statistically large sample between first use and the point when 50% of the lamps have failed. Note, this is not a manufacturer guarantee of life, but an estimate based on typical average testing. It is possible to define a "useful life" of a lamp based on practical considerations involving lumen depreciation and color shift. This Ushio 1000580 FNC/FG Bulb has an rated average life of 4000 hours. |
|
|
Beam Spread |
12°BEAM SPREAD The angular dimension of the cone of light from reflectorized lamps encompassing the central part of the beam out to the angle where the intensity is 50% of maximum. The beam angle sometimes called "beam spread" is often part of the ordering code for the reflectorized lamps. This Ushio 1000580 FNC/FG Bulb has a beam spread of 12°. |
|
|
Candle Power |
9000CANDLE POWER (CANDELA) The measure of luminous intensity of a source in a given direction. The term has been retained from the early days of lighting when a standard candle of a fixed size and composition was defined as producing one candela in every direction. A plot of intensity versus direction is called a candela distribution curve and is often provided for reflectorized lamps and for luminaires with a lamp operating in them. This Ushio 1000580 FNC/FG Bulb emits 9000 candela of candle power. |
|
|
Filament |
C-8FILAMENT Filaments are designated by a letter combination in which C is a coiled wire filament, and CC is a coiled wire that is itself wound into a larger coil. Numbers represent the type of filament-support arrangement. This Ushio 1000580 FNC/FG Bulb has a C-8 filament. |
|
|
Operating Position |
UniversalOPERATING POSITION Mercury and High Pressure Sodium lamps may be operated in any burn position and will still maintain their rated performance specifications. Metal Halide and Low Pressure Sodium lamps, however, are optimized for performance in specific burn positions, or may be restricted to certain burn positions for safety reasons. This Ushio 1000580 FNC/FG Bulb has an operating position of Universal. |
|
|
Bulb Finish |
Yellow LensBULB FINISH The bulb coating of the bulb. Typical values include clear, frost, and colored. This Ushio 1000580 FNC/FG Bulb has a Yellow Lens bulb finish. |
|
| Dimensions | |||
|
Maximum Overall Length (MOL) |
1.780 in (45.2 mm) |
|
|
Bulb Diameter |
2.000 in (50.8 mm) |
|
| Product Specifications | |||
|
Manufacturer Product Code |
1000580 |
|
|
Part Number |
BC2367 |
|
|
ANSI Code |
FNC/FG |
|
|
Ordering Code(s) |
FNC/FG JR12V-50W/SP12/Yellow |
|
|
Standard Case Size (listed prices are per lamp) |
50 |
|
|
UPC |
048777137949 |
|
|
Manufacturer Documents |
|
|
•Ushio Product Brochure |
|
|
Text-to-Speech  |
|
|
||
