|
    |
Ushio 1000333 ENH
| MFG Code 1000333 | Part Number BC1504 |
| 250 watts | 120 volts |
| GY5.3 (2-Pin, Flat Pins) Base Type | MR-16 Bulb Type |
| ENH ANSI Code | Clear Finish |
| 175 hrs. | 25° Beam Spread |
| 3250 K | 2" Bulb Diameter |
| 1.752" Max Overall Len |
Manufacturer:  |
|
 Be Authentic.BulbConnection is an Authorized Distributor for Ushio products. As an Authorized Distributor, this item is guaranteed to be an authentic, brand new, genuine Ushio part supplied directly from Ushio. |
Brand Comparison |
DISCOUNT PRICING
|
|
|
|
|
|
|
|
|
|
|
 |
 |
|
|||||
|
|
|
|||
|
|||||
|
Product Description |
|
|
Replacement for ZB-ENH. JCR •Focused Beam for Optical Applications •Only for Use in Approved Enclosed Halogen Fixtures •Oval 2-Pin Base - GY5.3, 2-Pin Base - GZ6.35 •50mm Dichroic Coated Reflector •Operate Base Down to Horizontal |
|
|
|
|
|
Specifications |
|
| General Specifications | |||
|
Watts |
250WATTS A unit of electrical power. Lamps are rated in watts to indicate the rate at which they consume energy. This Ushio 1000333 ENH Bulb is rated at 250 watts. |
|
|
Volts |
120VOLTS A measure of "electrical pressure" between two points. The higher the voltage, the more current will be pushed through a resistor connected across the points. The volt specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 277 V) refers to the line voltage it must be connected to. This Ushio 1000333 ENH Bulb is rated at 120 volts. |
|
|
Base Type |
GY5.3 (2-Pin, Flat Pins)BASE TYPE The base is the end of the lamp that fits into the receptacle connected to the electrical supply. There are many types of bases used in lamps, screw bases being the most common for incandescent and HID lamps, while bipin bases are common for linear fluorescent lamps. This Ushio 1000333 ENH Bulb has a base type of GY5.3 (2-Pin, Flat Pins). |
|
|
Bulb Type |
MR-16BULB TYPE The bulb type refers to the shape and class of the bulb. This Ushio 1000333 ENH Bulb has a base type of MR-16. |
|
|
Rated Average Life |
175 hrsRATED AVERAGE LIFE This is the manufacturer provided rating for the average expected life of a lamp. For most lamp types, rated lamp life is the length of time of a statistically large sample between first use and the point when 50% of the lamps have failed. Note, this is not a manufacturer guarantee of life, but an estimate based on typical average testing. It is possible to define a "useful life" of a lamp based on practical considerations involving lumen depreciation and color shift. This Ushio 1000333 ENH Bulb has an rated average life of 175 hours. |
|
|
Color Temperature |
3250 KCOLOR TEMPERATURE A measure indicating the degree of "yellowness" or "blueness" of a white light source. Measured in kelvins, Color Temperature represents the temperature an incandescent object (like a filament) must reach to mimic the color of the light emitting from the lamp. Yellowish-white ("warm") sources, like incandescent lamps, have lower color temperatures in the 2700K-3000K range; white and bluish-white ("cool") sources, such as cool white (4100K) and natural daylight (6000K), have higher color temperatures. The higher the color temperature the whiter, or bluer, the light will be. The lower the color temperature the more yellow the light will be. This Ushio 1000333 ENH Bulb has a color temperature of 3250 K. |
|
|
Beam Spread |
25°BEAM SPREAD The angular dimension of the cone of light from reflectorized lamps encompassing the central part of the beam out to the angle where the intensity is 50% of maximum. The beam angle sometimes called "beam spread" is often part of the ordering code for the reflectorized lamps. This Ushio 1000333 ENH Bulb has a beam spread of 25°. |
|
|
Filament |
CC-8FILAMENT Filaments are designated by a letter combination in which C is a coiled wire filament, and CC is a coiled wire that is itself wound into a larger coil. Numbers represent the type of filament-support arrangement. This Ushio 1000333 ENH Bulb has a CC-8 filament. |
|
|
Operating Position |
BDTHOPERATING POSITION Mercury and High Pressure Sodium lamps may be operated in any burn position and will still maintain their rated performance specifications. Metal Halide and Low Pressure Sodium lamps, however, are optimized for performance in specific burn positions, or may be restricted to certain burn positions for safety reasons. This Ushio 1000333 ENH Bulb has an operating position of BDTH. |
|
|
Bulb Finish |
ClearBULB FINISH The bulb coating of the bulb. Typical values include clear, frost, and colored. This Ushio 1000333 ENH Bulb has a Clear bulb finish. |
|
| Dimensions | |||
|
Maximum Overall Length (MOL) |
1.752 in (44.5 mm) |
|
|
Bulb Diameter |
2.000 in (50.8 mm) |
|
| Product Specifications | |||
|
Manufacturer Product Code |
1000333 |
|
|
Part Number |
BC1504 |
|
|
ANSI Code |
ENH |
|
|
Ordering Code(s) |
ENH JCR120V-250W |
|
|
Standard Case Size (listed prices are per lamp) |
10 |
|
|
UPC |
048777121771 |
|
|
Manufacturer Documents |
|
|
•Ushio Data Sheet |
|
|
Text-to-Speech  |
|
|
||
Customers Also Bought
