| MFG Code 1000318 | Part Number BC1487 |
| 250 watts | 24 volts |
| GX5.3 (2-Pin, Round Pins) Base Type | MR-16 Bulb Type |
| ELC ANSI Code | Clear Finish |
| 50 hrs. | 3400 K |
| 2" Bulb Diameter | 1.248" Light Center Len |
| 1.75" Max Overall Len |
Manufacturer: |
|
|
BulbConnection is an Authorized Distributor for Ushio products. As an Authorized Distributor, this item is guaranteed to be an authentic, brand new, genuine Ushio part supplied directly from Ushio. |
Brand Comparison |
|
|
|
|
|
|
|
|
|
|
![]() |
![]() |
|
||||||
|
||||||
Product Description |
||
97000104, Replacement for ZB-ELC, Mojo Spin Master I, Spinmaster, Mega Physik Dentalux Optima. JCR |
||
Description:
The Ushio JCR24V-250W replacement lamp has a Ushio product code of 1000318.
This Ushio JCR24V-250W bulb is a 250 watt bulb. The Ushio JCR24V-250W lamp is a 24 volt bulb.
The Ushio JCR24V-250W replacement lamp has a part number of BC1487.
This Ushio bulb has an ANSI code of ELC. The bulb type of this Ushio JCR24V-250W bulb is type MR-16. The base type of the Ushio JCR24V-250W replacement lamp may also be called MR16. The Ushio JCR24V-250W replacement lamp has a base type of GX5.3 (2-Pin, Round Pins). The maximum overall length of the Ushio JCR24V-250W replacement lamp is 1.750 inches or 44.5 millimeters. The bulb diameter of the Ushio JCR24V-250W replacement bulb is 2.000 inches or 50.8 millimeters. The light center length of this Ushio JCR24V-250W bulb is 1.248 inches or 31.7 millimeters. The Ushio JCR24V-250W replacement bulb is often referred to by the product code 1000318.
The Ushio JCR24V-250W replacement bulb has a reorder code of BC1487.
The manufacturer continuous use average life rating for this Ushio JCR24V-250W bulb is 50 hours. The color temperature of this replacement lamp is 3400 degrees Kelvin. The filament type of this Ushio JCR24V-250W bulb is CC-6. The Ushio JCR24V-250W replacement bulb has a Clear finish. The operating position of this replacement lamp is BDTH.
|
||
Specifications |
||
| General Specifications | |||
Watts |
250WATTS A unit of electrical power. Lamps are rated in watts to indicate the rate at which they consume energy. This Ushio 1000318 ELC Bulb is rated at 250 watts. |
||
Volts |
24VOLTS A measure of "electrical pressure" between two points. The higher the voltage, the more current will be pushed through a resistor connected across the points. The volt specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 277 V) refers to the line voltage it must be connected to. This Ushio 1000318 ELC Bulb is rated at 24 volts. |
||
Base Type |
GX5.3 (2-Pin, Round Pins)BASE TYPE The base is the end of the lamp that fits into the receptacle connected to the electrical supply. There are many types of bases used in lamps, screw bases being the most common for incandescent and HID lamps, while bipin bases are common for linear fluorescent lamps. This Ushio 1000318 ELC Bulb has a base type of GX5.3 (2-Pin, Round Pins). |
||
Bulb Type |
MR-16BULB TYPE The bulb type refers to the shape and class of the bulb. This Ushio 1000318 ELC Bulb has a base type of MR-16. |
||
Rated Average Life |
50 hrsRATED AVERAGE LIFE This is the manufacturer provided rating for the average expected life of a lamp. For most lamp types, rated lamp life is the length of time of a statistically large sample between first use and the point when 50% of the lamps have failed. Note, this is not a manufacturer guarantee of life, but an estimate based on typical average testing. It is possible to define a "useful life" of a lamp based on practical considerations involving lumen depreciation and color shift. This Ushio 1000318 ELC Bulb has an rated average life of 50 hours. |
||
Color Temperature |
3400 KCOLOR TEMPERATURE A measure indicating the degree of "yellowness" or "blueness" of a white light source. Measured in kelvins, Color Temperature represents the temperature an incandescent object (like a filament) must reach to mimic the color of the light emitting from the lamp. Yellowish-white ("warm") sources, like incandescent lamps, have lower color temperatures in the 2700K-3000K range; white and bluish-white ("cool") sources, such as cool white (4100K) and natural daylight (6000K), have higher color temperatures. The higher the color temperature the whiter, or bluer, the light will be. The lower the color temperature the more yellow the light will be. This Ushio 1000318 ELC Bulb has a color temperature of 3400 K. |
||
Filament |
CC-6FILAMENT Filaments are designated by a letter combination in which C is a coiled wire filament, and CC is a coiled wire that is itself wound into a larger coil. Numbers represent the type of filament-support arrangement. This Ushio 1000318 ELC Bulb has a CC-6 filament. |
||
Operating Position |
BDTHOPERATING POSITION Mercury and High Pressure Sodium lamps may be operated in any burn position and will still maintain their rated performance specifications. Metal Halide and Low Pressure Sodium lamps, however, are optimized for performance in specific burn positions, or may be restricted to certain burn positions for safety reasons. This Ushio 1000318 ELC Bulb has an operating position of BDTH. |
||
Bulb Finish |
ClearBULB FINISH The bulb coating of the bulb. Typical values include clear, frost, and colored. This Ushio 1000318 ELC Bulb has a Clear bulb finish. |
||
| Dimensions | |||
Maximum Overall Length (MOL) |
1.750 in (44.5 mm) |
||
Bulb Diameter |
2.000 in (50.8 mm) |
||
Light Center Length (LCL) |
1.248 in (31.7 mm) |
||
| Product Specifications | |||
Manufacturer Product Code |
1000318 |
||
Part Number |
BC1487 |
||
ANSI Code |
ELC |
||
Ordering Code(s) |
JCR24V-250W |
||
Standard Case Size (listed prices are per lamp) |
10 |
||
UPC |
048777120729 |
||
Manufacturer Documents |
||
| • |
||
Alternative Items |
||
| Long Life Versions | ||
|
GE ELC-5 15377 250W 24V
Philips ELC-5 38166-5 250W 24V Ushio ELC-3 1003106 250W 24V |
OSRAM ELC-3/X 4050300636467 250W 24V
OSRAM ELC-7 4050300666471 250W 24V Philips ELC/10 13658-0 250W 24V |
|