|
| MFG Code 7024BEP-FM-C | Part Number BC21621 |
| 24 volts | Clear Finish |
| 890 Candle Power | 8.75" Bulb Diameter |
| 12" Max Overall Len |
Manufacturer: |
|
|
BulbConnection is an Authorized Distributor for Tomar products. As an Authorized Distributor, this item is guaranteed to be an authentic, brand new, genuine Tomar part supplied directly from Tomar. |
|
|
|
|
|
|
|
|
|
|
![]() |
![]() |
|
||||||
|
||||||
Product Description |
||||||||||||||
The model 7024BEP family is designed, tested, and certified for use in hazardous locations and hostile environments classified by the NEC as Class I, Div. 1 & 2, Groups C & D, Class II, Div. 1 & 2, Groups E, F, G, and Class III, Hazardous Location Outdoors NEMA 4X. Design features include housing made of die cast high strength copper-free aluminum alloy with a baked powder epoxy finish, stainless steel hardware, o-ring sealed prestressed glass globe with double pitch acme threads for smooth assembly and ease of maintenance, and an optional guard which need not be removed for re-lamping. 7024BEP SUPER EXPLOSION-PROOF STROBE (24VDC) KEY FEATURES
7024BEP SUPER EXPLOSION-PROOF STROBE (24VDC) SPECIFICATIONS
7024BEP MODEL OPTIONS
ARCHITECT AND ENGINEER SPECIFICATIONSVisual signaling beacon shall be TOMAR model number series 7024BEP or approved equal. The beacon shall be UL Listed Class I, Division 1, Groups C and D; Class II, Division 1, Groups E, F and G; and Class III for use in specified hazardous locations and /or combustible atmospheres as classified by the National Electric Code. The warning beacon shall have a 26 watt power supply and generate 20 joules per flash. Light intensity shall be 890 effective candlepower, and the light source shall be a plug-in field replaceable double-flash xenon strobe lamp operating at 60 flashes per minute. The warning signal must have built-in RFI filters to protect against radio interference and spike voltages. Beacon must have a built-in flash circuit, and voltage range shall be 24VDC. Strobe beacon must meet UL 1203, and UL 1638, standards. Beacon must be rated NEMA 4X, with housing made of die cast high-strength copper-free aluminum alloy with baked powder epoxy finish, stainless steel hardware, O-ring sealed pre-stressed globe with double pitch acme threads for smooth assembly and ease of maintenance. Must include a Lexan® inner lens and tempered glass outer dome. The housing must be designed to accommodate a dome guard. |
||||||||||||||
Specifications |
||
| General Specifications | |||
Volts |
24VOLTS A measure of "electrical pressure" between two points. The higher the voltage, the more current will be pushed through a resistor connected across the points. The volt specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 277 V) refers to the line voltage it must be connected to. This Tomar 7024BEP-FM-C Bulb is rated at 24 volts. |
||
Candle Power |
890CANDLE POWER (CANDELA) The measure of luminous intensity of a source in a given direction. The term has been retained from the early days of lighting when a standard candle of a fixed size and composition was defined as producing one candela in every direction. A plot of intensity versus direction is called a candela distribution curve and is often provided for reflectorized lamps and for luminaires with a lamp operating in them. This Tomar 7024BEP-FM-C Bulb emits 890 candela of candle power. |
||
Bulb Finish |
ClearBULB FINISH The bulb coating of the bulb. Typical values include clear, frost, and colored. This Tomar 7024BEP-FM-C Bulb has a Clear bulb finish. |
||
| Dimensions | |||
Maximum Overall Length (MOL) |
12.000 in (304.8 mm) |
||
Bulb Diameter |
8.750 in (222.3 mm) |
||
| Product Specifications | |||
Manufacturer Product Code |
7024BEP-FM-C (7024BEPFMC) |
||
Part Number |
BC21621 |
||
Ordering Code(s) |
7024BEP SUPER EXPLOSION-PROOF ST |
||
Manufacturer Documents |
||
| • |
||
| • |
||