Click to View Tomar 495S-1280-P lamp pictures

Tomar 495S-1280-P MICROSTROBE® IV BEACONS - DC POW

MFG Code 495S-1280-P	Part Number BC21519
12 volts	Purple Finish
50 Candle Power	3" Bulb Diameter
5" Max Overall Len

Manufacturer:

Be Authentic.
BulbConnection is an Authorized Distributor for Tomar products. As an Authorized Distributor, this item is guaranteed to be an authentic, brand new, genuine Tomar part supplied directly from Tomar.

Mfg Retail Price: ~~154.33~~

You Save: 20%

DISCOUNT PRICING

$ 124.00 ea.

Connect with us! Email a lighting specialist

Great deals on Dental Replacement Lamps!

What's Hot

Check out the deals on these popular items!

OSRAM Q1000/4CL, NAED: 54570

Whelen ION Series Super-LED® Universal Red/Blue, Model# IONJ

Philips TUV 325W XPT HO

Product Description
Specifications
MFG Docs

Product Description

The MICROSTROBE® is a low profile, single flash beacon, low cost strobe light which features a plug-in replaceable lamp and Lexan® lens.

The high efficiency, solid state, power supply is fully potted in polyurethane for the ultimate in protection from moisture, vibration and exposure to high voltage. All units are polarity protected and have built-in filters to protect against radio interference and spike voltages.

NOTE:
THIS IS A DC POWERED MICROSTROBE™

MODEL NUMBERS

Model No. 470SSGP–1280 - Description: DC strobe, wall plate mount - Voltage: 12 – 80VDC
Model No. 470S–1280 - Description: DC strobe, surface mount - Voltage: 12 – 80VDC
Model No. 470SMB–1280 - Description: DC strobe, magnetic mount and 6’ straight cord - Voltage: 12 – 80VDC
Model No. 470SMB–1280/CC - Description: DC strobe, magnetic mount and coil cord - Voltage: 12 – 80VDC
Model No. 490S–1280 - Description: DC strobe, 1/2” female pipe mount - Voltage: 12 – 80VDC
Model No. 492S–1280 - Description: DC strobe, 3/4” IPS slip mount - Voltage: 12 – 80VDC
Note**- This product is NOT threaded.
Model No. 495S–1280 - Description: DC strobe, 1/2” male thread mount - Voltage: 12 – 80VDC

KEY FEATURES

Built-in RFI filters
Lens has hermetic O-ring seal
Solid state power supply
Available in amber, blue, clear, green, purple, and red
2 year warranty on power supply
1 year warranty on lamp
UL listed (all models)
NEMA 4X

SPECIFICATIONS

Flash Rate: 60 to 80 flashes per minute
Light Output: 50 effective candlepower (ECP)*
Voltage and Amperage:
- 12-80VDC draws 0.4A average @ 12VDC tapering to 0.05A average @ 80VDC
- 16-24VAC draws 0.35A average
Power Supply Output: 2.7 Watts 1.9 joules per flash. 190,000 Peak Candlepower**
Size and Weight: 5” tall x 3” dia. x 0.6 lbs ( 127mm x 76mm x 0.27kg )
Operating Temperature: -40°C to 65°C
Encapsulation: Fully potted in urethane material with no exposure to High Voltage possible

ARCHITECT AND ENGINEER SPECIFICATIONS

The strobe light shall be Tomar model number series 470, 480, 485, 490,492, 495 or approved equal. The light source shall be a plug-in field replaceable single-flash xenon strobe tube. The strobe light must have built-in RFI filters to protect against radio interference and spike voltages. It shall be polarity protected, and have a power supply fully potted in polyurethane. Voltage ranges shall be 12-80VDC or 16-24VAC, 120 VAC, and 240VAC. The strobe light shall be UL listed and of NEMA 4X type weatherproof design with screw-on Lexan® lens.

NOTES
*ECP (Effective Candlepower) is the intensity that would appear to an observer if the light were burning steadily.
**Peak Candlepower is the maximum light intensity generated by a flashing light during its light pulse.

Specifications

General Specifications
	Volts	12VOLTS A measure of "electrical pressure" between two points. The higher the voltage, the more current will be pushed through a resistor connected across the points. The volt specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 277 V) refers to the line voltage it must be connected to. This Tomar 495S-1280-P Bulb is rated at 12 volts.
	Candle Power	50CANDLE POWER (CANDELA) The measure of luminous intensity of a source in a given direction. The term has been retained from the early days of lighting when a standard candle of a fixed size and composition was defined as producing one candela in every direction. A plot of intensity versus direction is called a candela distribution curve and is often provided for reflectorized lamps and for luminaires with a lamp operating in them. This Tomar 495S-1280-P Bulb emits 50 candela of candle power.
	Bulb Finish	PurpleBULB FINISH The bulb coating of the bulb. Typical values include clear, frost, and colored. This Tomar 495S-1280-P Bulb has a Purple bulb finish.
Dimensions
	Maximum Overall Length (MOL)	5.000 in (127.0 mm)
	Bulb Diameter	3.000 in (76.2 mm)
Product Specifications
	Manufacturer Product Code	495S-1280-P (495S1280P)
	Part Number	BC21519
	Ordering Code(s)	MICROSTROBE® IV BEACONS - DC POW

	Manufacturer Documents
	•Tomar Product Information

	Text-to-Speech
	Tomar MICROSTROBE® IV BEACONS - DC POW. The Tomar MICROSTROBE® IV BEACONS - DC POW replacement lamp has a Tomar product code of 495S-1280-P. The Tomar MICROSTROBE® IV BEACONS - DC POW replacement bulb has a part number of BC21519. The Tomar MICROSTROBE® IV BEACONS - DC POW bulb is a 12 volt bulb. The maximum overall length of the Tomar MICROSTROBE® IV BEACONS - DC POW replacement lamp is 5.000 inches or 127.0 millimeters. The bulb diameter of the Tomar MICROSTROBE® IV BEACONS - DC POW replacement bulb is 3.000 inches or 76.2 millimeters. The Tomar MICROSTROBE® IV BEACONS - DC POW replacement bulb is often referred to by the product code 495S-1280-P. The Tomar MICROSTROBE® IV BEACONS - DC POW replacement bulb has a reorder code of BC21519. This bulb has a candle power rating of 50. The Tomar MICROSTROBE® IV BEACONS - DC POW replacement lamp has a Purple finish.