Tomar 2024XLS-B 2000XL SERIES COMPACT HAZARDOUS

TOMAR Electronics model 2000XL series is a compact Hazardous Location LED warning light engineered to perform in the harshest environments. Constructed of 30% glass-filled thermoset polyester, it is particularly well-suited for installations in corrosive, wet NEMA 4X harsh environments, and hazardous locations.

This high strength FRP material is resistant to the corrosive effects of most chemicals, hydrocarbons and solvents.Typical applications include manufacturing plants, chemical and petrochemical processing facilities, sewage treatment plants, off-shore and dockside installations, agricultural, commercial, industrial, mining and marine facilities.

Totally non-metallic these warning lights are fully sealed for NEMA 4X capability in any mounting configuration – base up, down or side positions. Their compact design makes them ideally suited where space consideration may be an issue. Unique mounts allow for Pendant, Flange (Ceiling), or Wall mount installations. Buy just the mounting style you need, or install directly onto approved panel surface. Optional dome guard is also available.

Available in either Flashing or Steady-burn mode, this model will operate over a wide AC and DC input voltage range. The DC version operates from 10-100 VDC, and the AC version from 85 – 265 VAC.

KEY FEATURES

• Class I, Division 2 Groups A, B, C, & D
• Class I, Zone 2, Groups IIC, IIB, IIA
• Class II Division 2 Groups F & G; Class III
• CSA Enclosure Type 4X, IP66
• NEMA 4X, Marine Rated
• 5-year warranty
• Sealed construction
• 5 LED Colors – Amber, Blue, Green, Red, and White
• Top blackout cap and additional cap colors available: Amber, Blue, Green, Red, White
• SPECIFICATIONS

• Lamp Type: LED
• Flash Rate: 75 NEOBE flashes per minute – each flash containing 7 rapid bursts of light (approximately 560 ms "on-time" and 240 ms "off-time")
• Voltage and Amperage (Flashing):
  • 200 mA @ 24 VDC
  • 040 mA @ 120 VAC
  • 020 mA @ 240 VAC
• Voltage and Amperage (Steady-burn):
  • 420 mA @ 24 VDC
  • 085 mA @ 120 VAC
  • 045 mA @ 240 VAC
• Temperature Code: T6
• Temperature Rating: –40º C to +65º C
• STANDARDS

• UL 1598 Standard for luminaires
• UL 1598A Marine luminaires
• UL 844 Standard for lighting fixtures for hazardous locations
• UL 1638 Standard for visual signaling applications
• CSA C22.2 no. 137-M1981 electric luminaires for use in hazardous locations
• Enclosed and gasketed, NEMA 3, 4X, IP66Visual signaling beacon shall be Tomar Electronics model number 2024XLF, 2124XLF, 2024XLS, or 2124XLF or approved equal. The beacon shall be cCSA/us Listed Class I, Division 2, Class I, Zone 2, Class II, Division 2, and Class III for use in specified hazardous locations and / or combustible atmospheres as classified by the National Electric Code. The warning beacon shall be of non-metallic glass-filled thermoset polyester construction. The light source shall be a single high-power LED. DC voltage range shall be from 10-100 VDC, and AC voltage range from 85 – 265 VAC. The warning signal shall be NEMA 4X rated in any mounting configuration – base up, down, or side positions.
• ARCHITECT AND ENGINEER SPECIFICATIONS