|
    |
Ushio 1000164 DAY/DAK
| MFG Code 1000164 | Part Number BC2214 |
| 500 watts | 120 volts |
| G17q (4-Pin) Base Type | T-10 Bulb Type |
| DAY/DAK ANSI Code | Clear Finish |
| 12500 Lumens | 25 hrs. |
| 3200 K | 1.26" Bulb Diameter |
| 1.563" Light Center Len | 4.095" Max Overall Len |
Manufacturer:  |
|
 Be Authentic.BulbConnection is an Authorized Distributor for Ushio products. As an Authorized Distributor, this item is guaranteed to be an authentic, brand new, genuine Ushio part supplied directly from Ushio. |
*Discontinued Item - 0 left in stock.
|
|
|
|
|
|
|
 |
 |
|
|||||
|
|
|
|||
|
|||||
|
Product Description |
|
|
Ushio Incandescent Projection Lamp - Proximity Reflector. Base G17Q-7. |
|
|
Description:
The Ushio DAY/DAK replacement lamp has a Ushio product code of 1000164.
This Ushio DAY/DAK lamp is a 500 watt bulb. The Ushio DAY/DAK bulb is a 120 volt bulb.
The Ushio DAY/DAK replacement bulb has a part number of BC2214.
This Ushio bulb has an ANSI code of DAY/DAK. The bulb type of this Ushio DAY/DAK bulb is type T-10. The base type of the Ushio DAY/DAK replacement lamp may also be called T10. The Ushio DAY/DAK replacement lamp has a base type of G17q (4-Pin). The maximum overall length of the Ushio DAY/DAK replacement bulb is 4.095 inches or 104.0 millimeters. The bulb diameter of the Ushio DAY/DAK replacement bulb is 1.260 inches or 32.0 millimeters. The light center length of this Ushio DAY/DAK lamp is 1.563 inches or 39.7 millimeters. The Ushio DAY/DAK replacement lamp is often referred to by the product code 1000164.
The Ushio DAY/DAK replacement lamp has a reorder code of BC2214.
The manufacturer continuous use average life rating for this Ushio DAY/DAK bulb is 25 hours. The color temperature of this replacement bulb is 3200 degrees Kelvin. The rated lumens value of the Ushio DAY/DAK replacement lamp is 12500. The filament type of this Ushio DAY/DAK lamp is C-13D. The Ushio DAY/DAK replacement bulb has a Clear finish. The operating position of this replacement bulb is Base Down.
|
|
|
Specifications |
|
| General Specifications | |||
|
Watts |
500WATTS A unit of electrical power. Lamps are rated in watts to indicate the rate at which they consume energy. This Ushio 1000164 DAY/DAK Bulb is rated at 500 watts. |
|
|
Volts |
120VOLTS A measure of "electrical pressure" between two points. The higher the voltage, the more current will be pushed through a resistor connected across the points. The volt specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 277 V) refers to the line voltage it must be connected to. This Ushio 1000164 DAY/DAK Bulb is rated at 120 volts. |
|
|
Base Type |
G17q (4-Pin)BASE TYPE The base is the end of the lamp that fits into the receptacle connected to the electrical supply. There are many types of bases used in lamps, screw bases being the most common for incandescent and HID lamps, while bipin bases are common for linear fluorescent lamps. This Ushio 1000164 DAY/DAK Bulb has a base type of G17q (4-Pin). |
|
|
Bulb Type |
T-10BULB TYPE The bulb type refers to the shape and class of the bulb. This Ushio 1000164 DAY/DAK Bulb has a base type of T-10. |
|
|
Rated Average Life |
25 hrsRATED AVERAGE LIFE This is the manufacturer provided rating for the average expected life of a lamp. For most lamp types, rated lamp life is the length of time of a statistically large sample between first use and the point when 50% of the lamps have failed. Note, this is not a manufacturer guarantee of life, but an estimate based on typical average testing. It is possible to define a "useful life" of a lamp based on practical considerations involving lumen depreciation and color shift. This Ushio 1000164 DAY/DAK Bulb has an rated average life of 25 hours. |
|
|
Color Temperature |
3200 KCOLOR TEMPERATURE A measure indicating the degree of "yellowness" or "blueness" of a white light source. Measured in kelvins, Color Temperature represents the temperature an incandescent object (like a filament) must reach to mimic the color of the light emitting from the lamp. Yellowish-white ("warm") sources, like incandescent lamps, have lower color temperatures in the 2700K-3000K range; white and bluish-white ("cool") sources, such as cool white (4100K) and natural daylight (6000K), have higher color temperatures. The higher the color temperature the whiter, or bluer, the light will be. The lower the color temperature the more yellow the light will be. This Ushio 1000164 DAY/DAK Bulb has a color temperature of 3200 K. |
|
|
Lumens |
12500LUMENS A measure of the luminous flux or quantity of light emitted by a source. For example, a dinner candle provides about 12 lumens. A 60-watt Soft White incandescent lamp provides about 840 lumens. This Ushio 1000164 DAY/DAK Bulb emits 12500 lumens. |
|
|
Filament |
C-13DFILAMENT Filaments are designated by a letter combination in which C is a coiled wire filament, and CC is a coiled wire that is itself wound into a larger coil. Numbers represent the type of filament-support arrangement. This Ushio 1000164 DAY/DAK Bulb has a C-13D filament. |
|
|
Operating Position |
Base DownOPERATING POSITION Mercury and High Pressure Sodium lamps may be operated in any burn position and will still maintain their rated performance specifications. Metal Halide and Low Pressure Sodium lamps, however, are optimized for performance in specific burn positions, or may be restricted to certain burn positions for safety reasons. This Ushio 1000164 DAY/DAK Bulb has an operating position of Base Down. |
|
|
Bulb Finish |
ClearBULB FINISH The bulb coating of the bulb. Typical values include clear, frost, and colored. This Ushio 1000164 DAY/DAK Bulb has a Clear bulb finish. |
|
| Dimensions | |||
|
Maximum Overall Length (MOL) |
4.095 in (104.0 mm) |
|
|
Bulb Diameter |
1.260 in (32.0 mm) |
|
|
Light Center Length (LCL) |
1.563 in (39.7 mm) |
|
| Product Specifications | |||
|
Manufacturer Product Code |
1000164 |
|
|
Part Number |
BC2214 |
|
|
ANSI Code |
DAY/DAK |
|
|
Ordering Code(s) |
DAY/DAK |
|
|
Standard Case Size (listed prices are per lamp) |
12 |
|
|
UPC |
048777110782 |
|
|
Safety Notices & Warnings |
|
|
Fan must run 5-10 min prior to turning on lamp. Do not turn on lamp when lamp is hot. When installing the lamp, do not touch the lamp with your fingers. Doing so will affect the life of the lamp. |
|
|
Alternative Items |
|
|
||
|
Text-to-Speech  |
|
|
||
