Tomar 495S-120-C 495S 120VAC MICROSTROBE Single

The 495S MICROSTROBE – Single Flash Strobe is a low profile, single flash, low-cost strobe light with a plug-in replaceable lamp and Lexan® lens.
This light is helpful in warning people of danger or directing traffic at night. The high-efficiency, solid-state, power supply is fully potted in polyurethane for the ultimate protection from moisture, vibration, and exposure to high voltage. All units are polarity protected and have built-in filters to protect against radio interference and spike voltages.

KEY FEATURES

• Built-in RFI filters
• Lens has hermetic O-ring seal
• Solid state power supply Available in amber, blue, clear, green, purple, and red
• NEMA 4X rating (NEMA 4X enclosures are primarily intended for outdoor use and offer a superior level of protection from corrosion and extreme environments.)

SPECS

• Flash Rate: 60 to 80 flashes per minute
• Light Output: 50 effective candlepower (ECP)* Voltage and Amperage: 120VAC and 240VAC draw 0.07A average
• Power Supply Output: 7 Watts: 1.9 joules per flash. 190,000 Peak Candlepower*
• Operating Temperature: -40 C to 65 C
• Encapsulation: Fully potted in urethane material with no exposure to High Voltage possible

POTENTIAL USES

• Farming Equipment
• Dock Warning Lights
• Office Warning Lights
• Industrial/Factory Warning
• Any situation were a warning light is needed or required

WHAT’S INCLUDED

• QTY 1.120VAC MICROSTROBE – Single Flash Strobe (1/2″ Male Thread Mount)

WARRANTY INFO

• 2 year warranty on power supply
• 1 year warranty on lamp UL listed (all models)

ARCHITECT & ENGINEER SPECIFICATIONS

The strobe light shall be Tomar model number series 470, 480, 485, 490,492, 495 or approved equal. The light source shall be a plug-in field replaceable single-flash xenon strobe tube. The strobe light must have built-in RFI filters to protect against radio interference and spike voltages. It shall be polarity protected, and have a power supply fully potted in polyurethane. Voltage ranges shall be 12-80VDC or 16-24VAC, 120 VAC, and 240VAC. The strobe light shall be UL listed and of NEMA 4X type weatherproof design with screw-on Lexan® lens.

*ECP (Effective Candlepower) is the intensity that would appear to an observer if the light were burning steadily.
**Peak Candlepower is the maximum light intensity generated by a flashing light during its light pulse.