|
Tomar 485S-R 485S-120 Red
| MFG Code 485S-R | Part Number BC18704 |
| 120 volts | E26 (Medium Screw) Base Type |
| Red Finish | 10000 hrs. |
| 3" Bulb Diameter | N/A" Light Center Len |
| 5" Max Overall Len |
Manufacturer:  |
|
 Be Authentic.BulbConnection is an Authorized Distributor for Tomar products. As an Authorized Distributor, this item is guaranteed to be an authentic, brand new, genuine Tomar part supplied directly from Tomar. |
DISCOUNT PRICING
 |
|
|
|
|
|
|
|
|
|
|
 |
 |
|
||||||
|
|
|
||||
|
||||||
|
Product Description |
|
|
The MICROSTROBE® family is a low profile, single flash, low cost strobe light which features a plug-in replaceable lamp and Lexan® lens. The high efficiency, solid state, power supply is fully potted in polyurethane for the ultimate in protection from moisture, vibration and exposure to high voltage. All units are polarity protected and have built-in filters to protect against radio interference and spike voltages. Features
Architect and Engineer SpecificationsThe strobe light shall be Tomar model number series 470, 480, 485, 490,492, 495 or approved equal. The light source shall be a plug-in field replaceable single-flash xenon strobe tube. The strobe light must have built-in RFI filters to protect against radio interference and spike voltages. It shall be polarity protected, and have a power supply fully potted in polyurethane. Voltage ranges shall be 12-80VDC or 16-24VAC, 120 VAC, and 240VAC. The strobe light shall be UL listed and of NEMA 4X type weatherproof design with screw-on Lexan® lens. *ECP (Effective Candlepower) is the intensity that would appear to an observer if the light were burning steadily. |
|
|
|
|
|
Specifications |
|
| General Specifications | |||
|
Volts |
120VOLTS A measure of "electrical pressure" between two points. The higher the voltage, the more current will be pushed through a resistor connected across the points. The volt specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 277 V) refers to the line voltage it must be connected to. This Tomar 485S-R Bulb is rated at 120 volts. |
|
|
Base Type |
E26 (Medium Screw)BASE TYPE The base is the end of the lamp that fits into the receptacle connected to the electrical supply. There are many types of bases used in lamps, screw bases being the most common for incandescent and HID lamps, while bipin bases are common for linear fluorescent lamps. This Tomar 485S-R Bulb has a base type of E26 (Medium Screw). |
|
|
Rated Average Life |
10000 hrsRATED AVERAGE LIFE This is the manufacturer provided rating for the average expected life of a lamp. For most lamp types, rated lamp life is the length of time of a statistically large sample between first use and the point when 50% of the lamps have failed. Note, this is not a manufacturer guarantee of life, but an estimate based on typical average testing. It is possible to define a "useful life" of a lamp based on practical considerations involving lumen depreciation and color shift. This Tomar 485S-R Bulb has an rated average life of 10000 hours. |
|
|
Bulb Finish |
RedBULB FINISH The bulb coating of the bulb. Typical values include clear, frost, and colored. This Tomar 485S-R Bulb has a Red bulb finish. |
|
| Dimensions | |||
|
Maximum Overall Length (MOL) |
5.000 in (127.0 mm) |
|
|
Bulb Diameter |
3.000 in (76.2 mm) |
|
| Product Specifications | |||
|
Manufacturer Product Code |
485S-R (485SR) |
|
|
Part Number |
BC18704 |
|
|
Ordering Code(s) |
485S-120 Red 485S-120-R |
|
|
Standard Case Size (listed prices are per lamp) |
5 |
|
|
Manufacturer Documents |
|
|
•Installation Instructions |
|
|
•Microstrobe Product Information |
|
|
Text-to-Speech  |
|
|
||
Customers Also Bought
