MaxLite 73872 MSITXLOD500SPASSY

The Bi-Level Motion Sensor is a line voltage switching occupancy sensor with 0-10V output for dimmable ballast or LED driver control. This sensor will provide full power output for dimmable ballast or an LED module when it detects the presence of an occupant, or vehicle, and switch back to the low dim level after the area is vacated for a period of time.
The motion sensor is available with various mounting options and interchangeable lenses. The sensor is designed to operate in the coldest of environments, down to -40°C/°F

FEATURES:
• Includes daylight harvesting for LUX level hold off at three different levels
• Capable of providing bi-level light control
• Omni-directional quad element infrared sensor
• 100~277VAC universal line voltage powered
• Frequency detection zero-cross relay switching
• 0-10V selectable output for low dim control
• Walk test and sensor operation LED indicator
• Direct lead wires for easy wiring connections
• 8 rotary DIP switch selectable control modes
• 7 low dim levels changeable via Accu-Set
• Available with variety of mounting options
• Available with interchangeable lens option
INSTALLATION NOTES:
1. The sensor is more sensitive to the movements “crossing” the detection zones than “toward” or “away” the sensor unit. To obtain better sensitivity, avoid placing the sensor in line with occupant path, if possible.
2. The closer the movement is to the sensor, the more sensitive the sensor is. The higher the sensor is installed, the larger movement is required to be detected.
3. Ensure to place the sensor at least at 1.5m (5 ft.) away from air supply ducts as rapid air flow may cause false activations.
4. The sensor cannot “see” the movements behind obstacles, such as furniture, shelf, glass or partition. As a general rule, each occupant should be able to clearly view the sensor unit.
5. For open office areas with partition which could block the sensor view to occupant movements, it is best to place the sensors over the intersection of multiple workstations. For large areas of open office or space, place multiple sensors so that there is overlap coverage with each adjacent sensor
SENSOR RANGE TESTING:
1. Set the control mode switch pointing to position “A”.
2. Walk within the desired range* at normal speed. Light should be switched ON for 5 seconds and dim for 10 seconds whenever sensor detects the movement.
3. The LED indicator behind the lens assembly will blink to indicate sensor detection as well.

WARRANTY:
5-year standard warranty* (further details available at www.maxlite.com/warranties)
*Product may be eligible for a warranty extension to 10 years, for an additional fee. Contact MaxLite for details