|
   |
Halco 81152 A21FR16/850/OMNI2/LED
| MFG Code 81152 | Part Number BC11997 |
| 16 watts | 120 volts |
| E26 (Medium Screw) Base Type | A-21 Bulb Type |
| White Finish | 82 CRI |
| 1800 Lumens | 15000 hrs. |
| 230° Beam Spread | 5000 K |
| 2.83" Bulb Diameter | 5.28" Max Overall Len |
Manufacturer:  |
|
 Be Authentic.BulbConnection is an Authorized Distributor for Halco products. As an Authorized Distributor, this item is guaranteed to be an authentic, brand new, genuine Halco part supplied directly from Halco. |
*Discontinued Item - 0 left in stock.
|
|
|
|
|
 |
 |
|
|||||
|
|
|
|||
|
|||||
|
Product Description |
|
|
Replaces 100W. Dimmable 120V lamps should only be used on 120V circuits. Lamps are designed for use with an analog dimmer and these products may not be compatible with all dimming devices. Lamps should be tested in the application prior to full installations on circuits using such devices. Not for use on timing devices, photo sensors, digital dimmers or occupancy sensors. Ensure minimum dimmer load is met for best performance. Do not use where directly exposed to water. Dimmable lamps dim down to 5%, but are limited by the dimming device range. Lamp is UL approved for damp locations. |
|
|
|
|
|
Specifications |
|
| General Specifications | |||
|
Watts |
16WATTS A unit of electrical power. Lamps are rated in watts to indicate the rate at which they consume energy. This Halco 81152 Bulb is rated at 16 watts. |
|
|
Volts |
120VOLTS A measure of "electrical pressure" between two points. The higher the voltage, the more current will be pushed through a resistor connected across the points. The volt specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 277 V) refers to the line voltage it must be connected to. This Halco 81152 Bulb is rated at 120 volts. |
|
|
Base Type |
E26 (Medium Screw)BASE TYPE The base is the end of the lamp that fits into the receptacle connected to the electrical supply. There are many types of bases used in lamps, screw bases being the most common for incandescent and HID lamps, while bipin bases are common for linear fluorescent lamps. This Halco 81152 Bulb has a base type of E26 (Medium Screw). |
|
|
Bulb Type |
A-21BULB TYPE The bulb type refers to the shape and class of the bulb. This Halco 81152 Bulb has a base type of A-21. |
|
|
Rated Average Life |
15000 hrsRATED AVERAGE LIFE This is the manufacturer provided rating for the average expected life of a lamp. For most lamp types, rated lamp life is the length of time of a statistically large sample between first use and the point when 50% of the lamps have failed. Note, this is not a manufacturer guarantee of life, but an estimate based on typical average testing. It is possible to define a "useful life" of a lamp based on practical considerations involving lumen depreciation and color shift. This Halco 81152 Bulb has an rated average life of 15000 hours. |
|
|
Color Temperature |
5000 KCOLOR TEMPERATURE A measure indicating the degree of "yellowness" or "blueness" of a white light source. Measured in kelvins, Color Temperature represents the temperature an incandescent object (like a filament) must reach to mimic the color of the light emitting from the lamp. Yellowish-white ("warm") sources, like incandescent lamps, have lower color temperatures in the 2700K-3000K range; white and bluish-white ("cool") sources, such as cool white (4100K) and natural daylight (6000K), have higher color temperatures. The higher the color temperature the whiter, or bluer, the light will be. The lower the color temperature the more yellow the light will be. This Halco 81152 Bulb has a color temperature of 5000 K. |
|
|
Beam Spread |
230°BEAM SPREAD The angular dimension of the cone of light from reflectorized lamps encompassing the central part of the beam out to the angle where the intensity is 50% of maximum. The beam angle sometimes called "beam spread" is often part of the ordering code for the reflectorized lamps. This Halco 81152 Bulb has a beam spread of 230°. |
|
|
Lumens |
1800LUMENS A measure of the luminous flux or quantity of light emitted by a source. For example, a dinner candle provides about 12 lumens. A 60-watt Soft White incandescent lamp provides about 840 lumens. This Halco 81152 Bulb emits 1800 lumens. |
|
|
Color Rendering Index (CRI) |
82COLOR RENDERING INDEX (CRI) An international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more true colors generally appear. CRI ratings of various lamps may be compared, but a numerical comparison is only valid if the lamps are close in color temperature. CRI differences among lamps are not usually significant (visible to the eye) unless the difference is more than 3-5 points. This Halco 81152 Bulb is rated at 82 CRI color rendering index. |
|
|
Operating Position |
UniversalOPERATING POSITION Mercury and High Pressure Sodium lamps may be operated in any burn position and will still maintain their rated performance specifications. Metal Halide and Low Pressure Sodium lamps, however, are optimized for performance in specific burn positions, or may be restricted to certain burn positions for safety reasons. This Halco 81152 Bulb has an operating position of Universal. |
|
|
Bulb Finish |
WhiteBULB FINISH The bulb coating of the bulb. Typical values include clear, frost, and colored. This Halco 81152 Bulb has a White bulb finish. |
|
| Dimensions | |||
|
Maximum Overall Length (MOL) |
5.280 in (134.1 mm) |
|
|
Bulb Diameter |
2.830 in (71.9 mm) |
|
| Product Specifications | |||
|
Manufacturer Product Code |
81152 |
|
|
Part Number |
BC11997 |
|
|
Ordering Code(s) |
A21FR16/850/OMNI2/LED |
|
|
Standard Case Size (listed prices are per lamp) |
6 |
|
|
RoHS Certified |
Yes |
|
|
Energy Star Rated |
Yes |
|
|
TCLP Compliant |
Yes |
|
|
UPC |
807154811526 |
|
|
Usage Notes |
|
|
Use only on 120 volts, 60-hertz frequency This device is not intended for use with emergency exit fixtures. If this product causes interference with other devices, change the location of the products involved. This dimmable lamp may not be compatible with all dimmers, timing devices, occupancy sensors, and photo sensors, please check the website www.halcolighting.com/ProLEDdim for up-to-date dimmer compatibility information. Rated for ICAT fixtures UL rated for damp location |
|
|
Manufacturer Documents |
|
|
•Dimmer Compatibility |
|
|
•Halco Product Brochure |
|
|
Safety Notices & Warnings |
|
|
Risk of electric shock. Do not use where directly exposed to water To avoid burns, do not touch the bulb during operation and allow to cool completely after switching off. |
|
|
Text-to-Speech  |
|
|
||
