|
   |
Halco 81095 MR11FTD/850/LED
| MFG Code 81095 | Part Number BC11837 |
| 3 watts | GU4 (Miniature 2-Pin) Base Type |
| MR-11 Bulb Type | FTD ANSI Code |
| Gray Finish | 82 CRI |
| 250 Lumens | 500 Candle Power |
| 40000 hrs. | 30° Beam Spread |
| 5000 K | 1.38" Bulb Diameter |
| 1.4" Max Overall Len |
Manufacturer:  |
|
 Be Authentic.BulbConnection is an Authorized Distributor for Halco products. As an Authorized Distributor, this item is guaranteed to be an authentic, brand new, genuine Halco part supplied directly from Halco. |
Mfg Retail Price: 18.23
You Save: 9%
DISCOUNT PRICING
|
|
|
|
|
|
|
|
|
 |
 |
|
||||||
|
|
|
||||
|
||||||
|
Product Description |
|
|
Replaces 20W. MR11 Series High power LED with superior optics and thermal construction for long life and energy efficient illumination.
Applications:
Markets:
Specifications
This device is intended for use on Class 2 circuits only. Use only on low voltage circuits with output ranges identified in specifications. These lamps may be dimmed using analog dimmers and magnetic transformers. May not be compatible with all dimmers and/or transformers and should be tested in application for compatibility prior to full installations on circuits using such devices. Not for use on timing devices, photo sensors or occupancy sensors. Caution: Risk of electric shock. Never disassemble or modify the bulb, no user serviceable parts inside. To avoid burns, do not touch the bulb during operation and allow to cool completely after switching off. This device is not intended for use in emergency exit fixtures. This device complies with Part 18 of the FCC rules. This product may cause interference with other devices. If interference occurs, change the location of the products involved. Do not use where directly exposed to water. Approved for use in sealed metal landscape fixtures. Dimmable lamps dim down to 5%, but are limited by the dimming device range. Rated for indoor use only. |
|
|
|
|
|
Specifications |
|
| General Specifications | |||
|
Watts |
3WATTS A unit of electrical power. Lamps are rated in watts to indicate the rate at which they consume energy. This Halco 81095 FTD Bulb is rated at 3 watts. |
|
|
Base Type |
GU4 (Miniature 2-Pin)BASE TYPE The base is the end of the lamp that fits into the receptacle connected to the electrical supply. There are many types of bases used in lamps, screw bases being the most common for incandescent and HID lamps, while bipin bases are common for linear fluorescent lamps. This Halco 81095 FTD Bulb has a base type of GU4 (Miniature 2-Pin). |
|
|
Bulb Type |
MR-11BULB TYPE The bulb type refers to the shape and class of the bulb. This Halco 81095 FTD Bulb has a base type of MR-11. |
|
|
Rated Average Life |
40000 hrsRATED AVERAGE LIFE This is the manufacturer provided rating for the average expected life of a lamp. For most lamp types, rated lamp life is the length of time of a statistically large sample between first use and the point when 50% of the lamps have failed. Note, this is not a manufacturer guarantee of life, but an estimate based on typical average testing. It is possible to define a "useful life" of a lamp based on practical considerations involving lumen depreciation and color shift. This Halco 81095 FTD Bulb has an rated average life of 40000 hours. |
|
|
Color Temperature |
5000 KCOLOR TEMPERATURE A measure indicating the degree of "yellowness" or "blueness" of a white light source. Measured in kelvins, Color Temperature represents the temperature an incandescent object (like a filament) must reach to mimic the color of the light emitting from the lamp. Yellowish-white ("warm") sources, like incandescent lamps, have lower color temperatures in the 2700K-3000K range; white and bluish-white ("cool") sources, such as cool white (4100K) and natural daylight (6000K), have higher color temperatures. The higher the color temperature the whiter, or bluer, the light will be. The lower the color temperature the more yellow the light will be. This Halco 81095 FTD Bulb has a color temperature of 5000 K. |
|
|
Beam Spread |
30°BEAM SPREAD The angular dimension of the cone of light from reflectorized lamps encompassing the central part of the beam out to the angle where the intensity is 50% of maximum. The beam angle sometimes called "beam spread" is often part of the ordering code for the reflectorized lamps. This Halco 81095 FTD Bulb has a beam spread of 30°. |
|
|
Lumens |
250LUMENS A measure of the luminous flux or quantity of light emitted by a source. For example, a dinner candle provides about 12 lumens. A 60-watt Soft White incandescent lamp provides about 840 lumens. This Halco 81095 FTD Bulb emits 250 lumens. |
|
|
Candle Power |
500CANDLE POWER (CANDELA) The measure of luminous intensity of a source in a given direction. The term has been retained from the early days of lighting when a standard candle of a fixed size and composition was defined as producing one candela in every direction. A plot of intensity versus direction is called a candela distribution curve and is often provided for reflectorized lamps and for luminaires with a lamp operating in them. This Halco 81095 FTD Bulb emits 500 candela of candle power. |
|
|
Color Rendering Index (CRI) |
82COLOR RENDERING INDEX (CRI) An international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more true colors generally appear. CRI ratings of various lamps may be compared, but a numerical comparison is only valid if the lamps are close in color temperature. CRI differences among lamps are not usually significant (visible to the eye) unless the difference is more than 3-5 points. This Halco 81095 FTD Bulb is rated at 82 CRI color rendering index. |
|
|
Operating Position |
UniversalOPERATING POSITION Mercury and High Pressure Sodium lamps may be operated in any burn position and will still maintain their rated performance specifications. Metal Halide and Low Pressure Sodium lamps, however, are optimized for performance in specific burn positions, or may be restricted to certain burn positions for safety reasons. This Halco 81095 FTD Bulb has an operating position of Universal. |
|
|
Bulb Finish |
GrayBULB FINISH The bulb coating of the bulb. Typical values include clear, frost, and colored. This Halco 81095 FTD Bulb has a Gray bulb finish. |
|
| Dimensions | |||
|
Maximum Overall Length (MOL) |
1.400 in (35.6 mm) |
|
|
Bulb Diameter |
1.380 in (35.1 mm) |
|
| Product Specifications | |||
|
Manufacturer Product Code |
81095 |
|
|
Part Number |
BC11837 |
|
|
ANSI Code |
FTD |
|
|
Ordering Code(s) |
MR11FTD/850/LED |
|
|
Standard Case Size (listed prices are per lamp) |
10 |
|
|
RoHS Certified |
Yes |
|
|
TCLP Compliant |
Yes |
|
|
UPC |
807154810956 |
|
|
Manufacturer Documents |
|
|
•Halco Product Brochure |
|
|
Text-to-Speech  |
|
|
||
