|
Philips 16832-8 BC25F10C/LL
| MFG Code 16832-8 | Part Number BC11162 |
| 25 watts | 120 volts |
| E12 (Candelabra Screw) Base Type | Clear Finish |
Manufacturer:  |
|
 Be Authentic.BulbConnection is an Authorized Distributor for Philips products. As an Authorized Distributor, this item is guaranteed to be an authentic, brand new, genuine Philips part supplied directly from Philips. |
*Discontinued Item - 0 left in stock.
|
|
|
|
|
|
|
 |
 |
|
|||||
 |
|
|
|||
|
|||||
|
Product Description |
|
|
12NC Logistics Code: 925259336304. |
|
|
Description:
The Philips BC25F10C/LL replacement lamp has a Philips product code of 16832-8.
This Philips BC25F10C/LL bulb is a 25 watt bulb. The Philips BC25F10C/LL lamp is a 120 volt bulb.
The Philips BC25F10C/LL replacement bulb has a part number of BC11162.
The Philips BC25F10C/LL replacement lamp has a base type of E12 (Candelabra Screw). The Philips BC25F10C/LL replacement bulb is often referred to by the product code 16832-8.
The Philips BC25F10C/LL replacement bulb has a reorder code of BC11162.
The rated lumens value of the Philips BC25F10C/LL replacement bulb is 105. The filament type of this Philips BC25F10C/LL lamp is C-7A. The Philips BC25F10C/LL replacement lamp has a Clear finish. The operating position of this replacement bulb is BD90.
|
|
|
Specifications |
|
| General Specifications | |||
|
Watts |
25WATTS A unit of electrical power. Lamps are rated in watts to indicate the rate at which they consume energy. This Philips 16832-8 Bulb is rated at 25 watts. |
|
|
Volts |
120VOLTS A measure of "electrical pressure" between two points. The higher the voltage, the more current will be pushed through a resistor connected across the points. The volt specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 277 V) refers to the line voltage it must be connected to. This Philips 16832-8 Bulb is rated at 120 volts. |
|
|
Base Type |
E12 (Candelabra Screw)BASE TYPE The base is the end of the lamp that fits into the receptacle connected to the electrical supply. There are many types of bases used in lamps, screw bases being the most common for incandescent and HID lamps, while bipin bases are common for linear fluorescent lamps. This Philips 16832-8 Bulb has a base type of E12 (Candelabra Screw). |
|
|
Lumens |
105LUMENS A measure of the luminous flux or quantity of light emitted by a source. For example, a dinner candle provides about 12 lumens. A 60-watt Soft White incandescent lamp provides about 840 lumens. This Philips 16832-8 Bulb emits 105 lumens. |
|
|
Filament |
C-7AFILAMENT Filaments are designated by a letter combination in which C is a coiled wire filament, and CC is a coiled wire that is itself wound into a larger coil. Numbers represent the type of filament-support arrangement. This Philips 16832-8 Bulb has a C-7A filament. |
|
|
Operating Position |
BD90OPERATING POSITION Mercury and High Pressure Sodium lamps may be operated in any burn position and will still maintain their rated performance specifications. Metal Halide and Low Pressure Sodium lamps, however, are optimized for performance in specific burn positions, or may be restricted to certain burn positions for safety reasons. This Philips 16832-8 Bulb has an operating position of BD90. |
|
|
Bulb Finish |
ClearBULB FINISH The bulb coating of the bulb. Typical values include clear, frost, and colored. This Philips 16832-8 Bulb has a Clear bulb finish. |
|
| Product Specifications | |||
|
Manufacturer Product Code |
16832-8 (168328) |
|
|
Part Number |
BC11162 |
|
|
Ordering Code(s) |
BC25F10C/LL |
|
|
Standard Case Size (listed prices are per lamp) |
6 |
|
|
UPC |
50046677168327 |
|
|
Text-to-Speech  |
|
|
||
