|
Ushio 5000788 MHL-252L
| MFG Code 5000788 | Part Number BC10883 |
| 2000 watts | 240 volts |
| C/LW/L Base Type | Clear Finish |
| 1.102" Bulb Diameter | 4.0" Light Center Len |
| 7.4" Max Overall Len |
Manufacturer:  |
|
 Be Authentic.BulbConnection is an Authorized Distributor for Ushio products. As an Authorized Distributor, this item is guaranteed to be an authentic, brand new, genuine Ushio part supplied directly from Ushio. |
DISCOUNT PRICING
 |
|
|
|
|
|
|
|
|
|
|
 |
 |
|
|||||
|
|
|
|||
|
|||||
|
Product Description |
|
|
MHL Metal HalideMedium Pressure Metal Halide Lamps Medium pressure, metal-halide lamps used in a variety of industries including uv curing, printed circuit board and photolithography exposure and industrial graphic arts processing applications. Features & Benefits
METAL HALIDE LAMPS USHIO MHL series metal halide lamps contain mercury, scandium and various other metal halogens in an inner bulb that produces a very high light output. As the high temperature of the arc discharge excites the halogenides to evaporate and separate into atoms, the metallic atoms illuminate and release the predetermined target ultraviolet wavelength. The mercury line of 365 nanometers remains present, and although depressed in strength, the combination of these halogenides effect the required ultraviolet wavelengths required for photopolymer, multi-spectrum and diazo processing applications. For the operation of an MHL lamp, bridge-gap ballasts designed specially for metal halide lamps should be used. Bridge-gap ballasts are designed with a higher open circuit secondary and a higher current carrying capacity. A thermal fuse should also be integrated into the ballast.
|
|
|
|
|
|
Specifications |
|
| General Specifications | |||
|
Watts |
2000WATTS A unit of electrical power. Lamps are rated in watts to indicate the rate at which they consume energy. This Ushio 5000788 Bulb is rated at 2000 watts. |
|
|
Volts |
240VOLTS A measure of "electrical pressure" between two points. The higher the voltage, the more current will be pushed through a resistor connected across the points. The volt specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 277 V) refers to the line voltage it must be connected to. This Ushio 5000788 Bulb is rated at 240 volts. |
|
|
Base Type |
C/LW/LBASE TYPE The base is the end of the lamp that fits into the receptacle connected to the electrical supply. There are many types of bases used in lamps, screw bases being the most common for incandescent and HID lamps, while bipin bases are common for linear fluorescent lamps. This Ushio 5000788 Bulb has a base type of C/LW/L. |
|
|
Operating Position |
H10OPERATING POSITION Mercury and High Pressure Sodium lamps may be operated in any burn position and will still maintain their rated performance specifications. Metal Halide and Low Pressure Sodium lamps, however, are optimized for performance in specific burn positions, or may be restricted to certain burn positions for safety reasons. This Ushio 5000788 Bulb has an operating position of H10. |
|
|
Bulb Finish |
ClearBULB FINISH The bulb coating of the bulb. Typical values include clear, frost, and colored. This Ushio 5000788 Bulb has a Clear bulb finish. |
|
| Dimensions | |||
|
Maximum Overall Length (MOL) |
7.400 in (188.0 mm) |
|
|
Bulb Diameter |
1.102 in (28.0 mm) |
|
|
Light Center Length (LCL) |
4.000 in (101.6 mm) |
|
| Product Specifications | |||
|
Manufacturer Product Code |
5000788 |
|
|
Part Number |
BC10883 |
|
|
Ordering Code(s) |
MHL-252L |
|
|
Standard Case Size (listed prices are per lamp) |
1 |
|
|
UPC |
048777311400 |
|
|
Manufacturer Documents |
|
|
•Ushio Data Sheet |
|
|
Safety Notices & Warnings |
|
|
LAMP OPERATION AND SAFETY Metal halogens are extremely active compounds producing high levels of both UV-A and short-wave UV-B and UV-C radiation known to be harmful to the human eye and skin. To avoid danger, the bulb temperature must be maintained within the recommended limits. As the bulb temperature rises, high internal pressure can build to the fracturing point of the quartz; to stay within the safety limits the temperature must not exceed 850ºC. As with mercury vapor lamps, metal halide lamps should be operated and handled only under the direction and supervision of qualified personnel.
|
|
|
Text-to-Speech  |
|
|
||
