|
Philips 15932-7 250R40/HR/TG 120V
| MFG Code 15932-7 | Part Number BC10623 |
| 250 watts | 120 volts |
| E26 (Medium Screw) Base Type | R-40 Bulb Type |
| Red Finish |
Manufacturer:  |
|
 Be Authentic.BulbConnection is an Authorized Distributor for Philips products. As an Authorized Distributor, this item is guaranteed to be an authentic, brand new, genuine Philips part supplied directly from Philips. |
*Discontinued Item - 0 left in stock.
|
|
|
|
|
|
|
 |
 |
|
||||||
 |
|
|
||||
|
||||||
|
Product Description |
|
|
12NC Logistics Code: 925272736308. Reflector Infrared. Philips Family of Specialty Incandescents provide the perfect light for dramatic accents and display lighting as well as general lighting in a variety of applications. Philips Infrared lamps are suited for heating and drying in industrial and commercial applications. These incandescent, gas-filled infrared heat lamps come up to full temperature almost immediately, eliminating costly warm-up time. Highly efficient heat generators produce a minimum of light rays and a high amount of infrared radiation. The BR40 lamp provides a built-in Features
Applications
|
|
|
|
|
|
Specifications |
|
| General Specifications | |||
|
Watts |
250WATTS A unit of electrical power. Lamps are rated in watts to indicate the rate at which they consume energy. This Philips 15932-7 Bulb is rated at 250 watts. |
|
|
Volts |
120VOLTS A measure of "electrical pressure" between two points. The higher the voltage, the more current will be pushed through a resistor connected across the points. The volt specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 277 V) refers to the line voltage it must be connected to. This Philips 15932-7 Bulb is rated at 120 volts. |
|
|
Base Type |
E26 (Medium Screw)BASE TYPE The base is the end of the lamp that fits into the receptacle connected to the electrical supply. There are many types of bases used in lamps, screw bases being the most common for incandescent and HID lamps, while bipin bases are common for linear fluorescent lamps. This Philips 15932-7 Bulb has a base type of E26 (Medium Screw). |
|
|
Bulb Type |
R-40BULB TYPE The bulb type refers to the shape and class of the bulb. This Philips 15932-7 Bulb has a base type of R-40. |
|
|
Filament |
C-9FILAMENT Filaments are designated by a letter combination in which C is a coiled wire filament, and CC is a coiled wire that is itself wound into a larger coil. Numbers represent the type of filament-support arrangement. This Philips 15932-7 Bulb has a C-9 filament. |
|
|
Operating Position |
UniversalOPERATING POSITION Mercury and High Pressure Sodium lamps may be operated in any burn position and will still maintain their rated performance specifications. Metal Halide and Low Pressure Sodium lamps, however, are optimized for performance in specific burn positions, or may be restricted to certain burn positions for safety reasons. This Philips 15932-7 Bulb has an operating position of Universal. |
|
|
Bulb Finish |
RedBULB FINISH The bulb coating of the bulb. Typical values include clear, frost, and colored. This Philips 15932-7 Bulb has a Red bulb finish. |
|
| Dimensions | |||
|
Maximum Overall Length (MOL) |
6.900 in (175.3 mm) |
|
| Product Specifications | |||
|
Manufacturer Product Code |
15932-7 (159327) |
|
|
Part Number |
BC10623 |
|
|
Ordering Code(s) |
250R40/HR/TG 120V |
|
|
Standard Case Size (listed prices are per lamp) |
4 |
|
|
UPC |
046677159320 |
|
|
Manufacturer Documents |
|
|
•Philips Product Leaflet |
|
|
Text-to-Speech  |
|
|
||
