|
Hikari MED-M01015 JC 12V 50W G6.35
| MFG Code MED-M01015 | Part Number BC8540 |
| 50 watts | 12 volts |
| G6.35 (Glass 2-Pin) Base Type | Clear Finish |
| 950 Lumens | 2000 hrs. |
| 0.433" Bulb Diameter | 1.2" Light Center Len |
| 1.7" Max Overall Len |
Manufacturer:  |
|
 Be Authentic.BulbConnection is an Authorized Distributor for Hikari products. As an Authorized Distributor, this item is guaranteed to be an authentic, brand new, genuine Hikari part supplied directly from Hikari. |
*Discontinued Item - 0 left in stock.
|
|
|
|
|
|
|
 |
 |
|
|||||
 |
|
|
|||
|
|||||
|
Product Description |
|
|
Cross to Guerra 6419/7, JE-006C. |
|
|
Description:
The Hikari JC 12V 50W G6.35 replacement lamp has a Hikari product code of MED-M01015.
This Hikari JC 12V 50W G6.35 bulb is a 50 watt bulb. The Hikari JC 12V 50W G6.35 lamp is a 12 volt bulb.
The Hikari JC 12V 50W G6.35 replacement bulb has a part number of BC8540.
The Hikari JC 12V 50W G6.35 replacement lamp has a base type of G6.35 (Glass 2-Pin). The maximum overall length of the Hikari JC 12V 50W G6.35 replacement bulb is 1.700 inches or 43.2 millimeters. The bulb diameter of the Hikari JC 12V 50W G6.35 replacement bulb is 0.433 inches or 11.0 millimeters. The light center length of this Hikari JC 12V 50W G6.35 bulb is 1.200 inches or 30.5 millimeters. The Hikari JC 12V 50W G6.35 replacement lamp is often referred to by the product code MED-M01015.
The Hikari JC 12V 50W G6.35 replacement lamp has a reorder code of BC8540.
The manufacturer continuous use average life rating for this Hikari JC 12V 50W G6.35 bulb is 2000 hours. The rated lumens value of the Hikari JC 12V 50W G6.35 replacement bulb is 950. The filament type of this Hikari JC 12V 50W G6.35 bulb is C-6. The Hikari JC 12V 50W G6.35 replacement lamp has a Clear finish.
|
|
|
Specifications |
|
| General Specifications | |||
|
Watts |
50WATTS A unit of electrical power. Lamps are rated in watts to indicate the rate at which they consume energy. This Hikari MED-M01015 Bulb is rated at 50 watts. |
|
|
Volts |
12VOLTS A measure of "electrical pressure" between two points. The higher the voltage, the more current will be pushed through a resistor connected across the points. The volt specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 277 V) refers to the line voltage it must be connected to. This Hikari MED-M01015 Bulb is rated at 12 volts. |
|
|
Base Type |
G6.35 (Glass 2-Pin)BASE TYPE The base is the end of the lamp that fits into the receptacle connected to the electrical supply. There are many types of bases used in lamps, screw bases being the most common for incandescent and HID lamps, while bipin bases are common for linear fluorescent lamps. This Hikari MED-M01015 Bulb has a base type of G6.35 (Glass 2-Pin). |
|
|
Rated Average Life |
2000 hrsRATED AVERAGE LIFE This is the manufacturer provided rating for the average expected life of a lamp. For most lamp types, rated lamp life is the length of time of a statistically large sample between first use and the point when 50% of the lamps have failed. Note, this is not a manufacturer guarantee of life, but an estimate based on typical average testing. It is possible to define a "useful life" of a lamp based on practical considerations involving lumen depreciation and color shift. This Hikari MED-M01015 Bulb has an rated average life of 2000 hours. |
|
|
Lumens |
950LUMENS A measure of the luminous flux or quantity of light emitted by a source. For example, a dinner candle provides about 12 lumens. A 60-watt Soft White incandescent lamp provides about 840 lumens. This Hikari MED-M01015 Bulb emits 950 lumens. |
|
|
Filament |
C-6FILAMENT Filaments are designated by a letter combination in which C is a coiled wire filament, and CC is a coiled wire that is itself wound into a larger coil. Numbers represent the type of filament-support arrangement. This Hikari MED-M01015 Bulb has a C-6 filament. |
|
|
Bulb Finish |
ClearBULB FINISH The bulb coating of the bulb. Typical values include clear, frost, and colored. This Hikari MED-M01015 Bulb has a Clear bulb finish. |
|
| Dimensions | |||
|
Maximum Overall Length (MOL) |
1.700 in (43.2 mm) |
|
|
Bulb Diameter |
0.433 in (11.0 mm) |
|
|
Light Center Length (LCL) |
1.200 in (30.5 mm) |
|
| Product Specifications | |||
|
Manufacturer Product Code |
MED-M01015 (MEDM01015) |
|
|
Part Number |
BC8540 |
|
|
Ordering Code(s) |
JC 12V 50W G6.35 |
|
|
Standard Case Size (listed prices are per lamp) |
10 |
|
|
UPC |
844409007365 |
|
|
Text-to-Speech  |
|
|
||
